|
|
___
|
|
___
|
|
|
___
|
|
___
|
|
|
|
|
|
|
|
# content
|
|
# Content
|
|
|
|
|
|
|
|
- [coming out of shutdown](#coming-out-of-shutdown)
|
|
- [coming out of shutdown](#coming-out-of-shutdown)
|
|
|
- [energy calibration](#energy-calibration)
|
|
- [energy calibration](#energy-calibration)
|
| ... | @@ -15,7 +15,7 @@ ___ |
... | @@ -15,7 +15,7 @@ ___ |
|
|
___
|
|
___
|
|
|
|
|
|
|
|
|
|
|
|
|
## coming out of shutdown
|
|
## Coming out of shutdown
|
|
|
1) home motors using procedure in [elog](https://logbook.xray.aps.anl.gov/29id/RSXS+Endstation/44)
|
|
1) home motors using procedure in [elog](https://logbook.xray.aps.anl.gov/29id/RSXS+Endstation/44)
|
|
|
2) check tth minimum/maximum allowed position in extended panel (PI software): after homing tth PI/dial position will be set to either of those, which will prevent it to move it in that direction
|
|
2) check tth minimum/maximum allowed position in extended panel (PI software): after homing tth PI/dial position will be set to either of those, which will prevent it to move it in that direction
|
|
|
3) sync EPICS values:
|
|
3) sync EPICS values:
|
| ... | | ... | |
