... | ... | @@ -19,10 +19,11 @@ To home tth from ![image](uploads/980f2f9c2666873734aa9fac9361a535/image.png): m |
|
|
- ![image](uploads/1a6b0405009c84853cbd395acc9ad865/image.png)
|
|
|
- Move to a value more positive than E1
|
|
|
- Set limit settings to normally closed for both directions in: ![image](uploads/22033937627b72b32825c700066dc509/image.png)
|
|
|
- once in between the 2 limits, click ncal ![image](uploads/e40cef0f3899e5828930152ac30811f6/image.png)
|
|
|
- software should reset tth to 0
|
|
|
- reset soft limits
|
|
|
- reset limit settings to ignore normally open x2
|
|
|
- When more positive than E1 (cal) position, click ncal to home cal in negative direction![image](uploads/e40cef0f3899e5828930152ac30811f6/image.png)
|
|
|
- Software should reset tth to 0 when reaches E1
|
|
|
- Reset soft limits to reverse = -200 and forward = -100
|
|
|
- Set limit settings to ignore normally closed for both directions in: ![image](uploads/22033937627b72b32825c700066dc509/image.png)
|
|
|
- Close LabView
|
|
|
|
|
|
|
|
|
|
... | ... | |