... | ... | @@ -41,7 +41,7 @@ If KTH is shaking: make sure Integral (I) coeff at stanstill =< 0.002 or lower |
|
|
PI stages are running left handed in the native software.
|
|
|
Dial positions in epics match PI software after the following homing procedure.
|
|
|
|
|
|
PI stages homing procedure from the PI software (not recommended, see labview procedure above instead):
|
|
|
PI stages homing procedure from the PI software (not recommended for tth, see labview procedure above instead):
|
|
|
|
|
|
TTH (6449V31100 - 164.54.118.24): The reference switch is located around direct beam. Pick your direction depending on where TTH is: if TTH is on the outboard (inboard) hemisphere of the chamber, use positive (negative) limit.
|
|
|
Home without changing the max/min allowed position
|
... | ... | |