Commit eb6c6a6b authored by kpetersn's avatar kpetersn
Browse files

Don't PINI things that should be selectively initialized

parent 77ddec62
......@@ -86,7 +86,7 @@ record(bo, "$(P)$(T):lnpMode")
{
field(DTYP, "asynInt32")
field(OUT, "@asyn($(PORT),$(ADDR))LNP_MODE_OUT_VALUE")
field(PINI, "YES")
#!field(PINI, "YES")
field(ZNAM, "Manual")
field(ONAM, "Auto")
field(VAL, 1)
......@@ -96,7 +96,7 @@ record(longout, "$(P)$(T):lnpSpeed")
{
field(DTYP, "asynInt32")
field(OUT, "@asyn($(PORT),$(ADDR))LNP_SPEED_OUT_VALUE")
field(PINI, "YES")
#!field(PINI, "YES")
field(OMSL, "closed_loop")
field(DRVH, 100)
field(DRVL, 0)
......@@ -123,7 +123,7 @@ record(bo, "$(P)$(T):vacuum")
{
field(DTYP, "asynInt32")
field(OUT, "@asyn($(PORT),$(ADDR))VACUUM_OUT_VALUE")
field(PINI, "YES")
#!field(PINI, "YES")
field(ZNAM, "Off")
field(ONAM, "On")
field(VAL, 0)
......@@ -133,12 +133,12 @@ record(ao, "$(P)$(T):vacuumLimit")
{
field(DTYP, "asynFloat64")
field(OUT, "@asyn($(PORT),$(ADDR))VACUUM_LIMIT_OUT_VALUE")
field(PINI, "YES")
#!field(PINI, "YES")
field(LINR, "NO CONVERSION")
field(PREC, "4")
field(EGU, "mBar")
field(SCAN, "Passive")
field(VAL, "1013.25")
field(VAL, "10.1325")
field(FLNK, "$(P)$(T):vacuumLimit_RBV")
}
......
......@@ -23,7 +23,9 @@ iocInit
# Turn off heating by default
#!dbpf "$(PREFIX)tc1:heating" "0"
# Make Auto mode the default
# Turn off vacuum by default
#!dbpf "$(PREFIX)tc1:vacuum" "0"
# Make LNP Auto mode the default
#!dbpf "$(PREFIX)tc1:lnpMode" "1"
# Ugly hack to allow disconnecting for manual control via the screen
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment