From 451eb4409dfc1bc99a4636c58e5c2a6700af358d Mon Sep 17 00:00:00 2001
From: timmmooney <mooney@aps.anl.gov>
Date: Tue, 21 May 2013 20:27:32 +0000
Subject: [PATCH]
---
iocBoot/iocvxWorks/st.cmd | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/iocBoot/iocvxWorks/st.cmd b/iocBoot/iocvxWorks/st.cmd
index cb64d85..4323ebb 100644
--- a/iocBoot/iocvxWorks/st.cmd
+++ b/iocBoot/iocvxWorks/st.cmd
@@ -97,6 +97,8 @@ putenv "SDB=$(SSCAN)/sscanApp/Db/standardScans.db"
dbLoadRecords("$(SDB)","P=xxx:,MAXPTS1=1000,MAXPTS2=1000,MAXPTS3=1000,MAXPTS4=1000,MAXPTSH=1000")
dbLoadRecords("$(SSCAN)/sscanApp/Db/saveData.db","P=xxx:")
dbLoadRecords("$(SSCAN)/sscanApp/Db/scanProgress.db","P=xxx:scanProgress:")
+# configMenu example. See create_manual_set() command after iocInit.
+dbLoadRecords("$(AUTOSAVE)/asApp/Db/configMenu.db","P=xxx:,CONFIG=scan1")
# A set of scan parameters for each positioner. This is a convenience
# for the user. It can contain an entry for each scannable thing in the
@@ -291,7 +293,7 @@ putenv "FBO=xxx:Unidig1Bo"
#seq(&pf4,"name=pf2,P=xxx:,H=pf4:,B=B,M=xxx:userCalc1,BP=xxx:Unidig1Bo,B1=7,B2=8,B3=9,B4=10")
# Alternative pf4 filter seq program
-seq filterDrive,"NAME=filterDrive,P=xxx:,R=filter:,NUM_FILTERS=16"
+seq &filterDrive,"NAME=filterDrive,P=xxx:,R=filter:,NUM_FILTERS=16"
### Octupole power-supply
#seq &octupole, "P=xxx:, Q=octupole:, S=softGlue:"
@@ -299,7 +301,10 @@ seq filterDrive,"NAME=filterDrive,P=xxx:,R=filter:,NUM_FILTERS=16"
# MAXV trajectory scan
#seq &MAX_trajectoryScan, "P=xxx:,R=traj1:,M1=m1,M2=m2,M3=m3,M4=m4,M5=m5,M6=m6,M7=m7,M8=m8,PORT=none"
+# This SNL programs reads the MCS
seq(&SIS38XX_SNL, "P=xxx:3820:, R=mca, NUM_SIGNALS=8, FIELD=READ")
+
+# Implements for scanProgress.db
seq &scanProgress, "S=xxx:, P=xxx:scanProgress:"
### Start up the autosave task and tell it what to do.
@@ -325,11 +330,14 @@ create_monitor_set("auto_settings.req",30,"P=xxx:")
#macro="P=xxx:,SAVENAMEPV=xxx:userStringCalc1.SVAL,SAVEPATHPV=xxx:userStringCalc2.SVAL"
#create_triggered_set("trigSet.req","xxx:userStringCalc1.A",macro)
-# configMenu example
+# configMenu for softGlue
# This autosave command cooperates with the configMenu.db database loaded by
# softGlue.cmd. Note that the request file MUST be named $(CONFIG)Menu.req
create_manual_set("SGMenu.req","P=xxx:,CONFIG=SG,H=softGlue:")
+# configMenu for scans
+create_manual_set("scan1Menu.req","P=xxx:,CONFIG=scan1")
+
### Start the saveData task. If you start this task, scan records mentioned
# in saveData.req will *always* write data files. There is no programmable
# disable for this software.
@@ -338,7 +346,8 @@ saveData_Init("saveData.req", "P=xxx:")
# If memory allocated at beginning free it now
##free(mem)
-dbcar(0,1)
+# Diagnostic: CA links in all records
+#dbcar(0,1)
# motorUtil (allstop & alldone)
motorUtilInit("xxx:")
--
GitLab