diff --git a/iocBoot/iocvxWorks/canberra_3.cmd b/iocBoot/iocvxWorks/canberra_3.cmd index 54d13650a5fd756ec62f63527d0c4d866223910d..130819a174ddf38227d66297ba330422fb764b96 100644 --- a/iocBoot/iocvxWorks/canberra_3.cmd +++ b/iocBoot/iocvxWorks/canberra_3.cmd @@ -1,13 +1,20 @@ # BEGIN canberra_3.cmd -------------------------------------------------------- -# AIMConfig(serverName, int etherAddr, int port, int maxChans, -# int maxSignals, int maxSequences, etherDev, queueSize) -AIMConfig("AIM1/1", 0xa78, 1, 2048, 1, 1, "ei0", 100) -AIMConfig("AIM1/2", 0xa78, 2, 2048, 1, 1, "ei0", 100) -AIMConfig("AIM2/1", 0xa79, 1, 2048, 1, 1, "ei0", 100) - -dbLoadRecords("$(MCA)/mcaApp/Db/3element.db","P=xxx:med:,N=2000") +# AIMConfig(portName, ethernet_address, portNumber, maxChans, +# maxSignals, maxSequences, ethernetDevice) +# portName, # asyn port name to be created +# ethernet_address, # Low order 16 bits of Ethernet hardware address +# portNumber, # ADC port on AIM (1 or 2) +# maxChans, # Maximum channels for this input +# maxSignals, # Maximum signals for this input (>1 for MCS or multiplexor) +# maxSequences, # Maximum sequences for time resolved applications +# ethernetDevice) # Ethernet device name on IOC +# # Typically ei0 for Motorola 68K, dc0 for ppc, fei0 for 5100, eth0 for Linux +AIMConfig("AIM1/1", 0xa78, 1, 2048, 1, 1, "ei0") +AIMConfig("AIM1/2", 0xa78, 2, 2048, 1, 1, "ei0") +AIMConfig("AIM2/1", 0xa79, 1, 2048, 1, 1, "ei0") +dbLoadRecords("$(MCA)/mcaApp/Db/3element.db","P=xxx:med:,BASENAME=mca,N=2000") # icbConfig(portName, ethernetAddress, icbAddress, moduleType) # portName to give to this asyn port # ethernetAddress - Ethernet address of module, low order 16 bits @@ -28,6 +35,6 @@ icbConfig("icbTca2", 0xa78, 1, 3) icbConfig("icbTca3", 0xa78, 2, 3) -dbLoadTemplate("3element.substitutions") +dbLoadTemplate("canberra_3.substitutions") # END canberra_3.cmd ----------------------------------------------------------