From 72b44d7beac81bc9ab9cb4e0d5f8ca4cd76f40d0 Mon Sep 17 00:00:00 2001
From: timmmooney <mooney@aps.anl.gov>
Date: Fri, 25 Mar 2005 16:47:25 +0000
Subject: [PATCH] New AIMConfig() args, substitutions file renamed
---
iocBoot/iocvxWorks/canberra_3.cmd | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/iocBoot/iocvxWorks/canberra_3.cmd b/iocBoot/iocvxWorks/canberra_3.cmd
index 54d1365..130819a 100644
--- a/iocBoot/iocvxWorks/canberra_3.cmd
+++ b/iocBoot/iocvxWorks/canberra_3.cmd
@@ -1,13 +1,20 @@
# BEGIN canberra_3.cmd --------------------------------------------------------
-# AIMConfig(serverName, int etherAddr, int port, int maxChans,
-# int maxSignals, int maxSequences, etherDev, queueSize)
-AIMConfig("AIM1/1", 0xa78, 1, 2048, 1, 1, "ei0", 100)
-AIMConfig("AIM1/2", 0xa78, 2, 2048, 1, 1, "ei0", 100)
-AIMConfig("AIM2/1", 0xa79, 1, 2048, 1, 1, "ei0", 100)
-
-dbLoadRecords("$(MCA)/mcaApp/Db/3element.db","P=xxx:med:,N=2000")
+# AIMConfig(portName, ethernet_address, portNumber, maxChans,
+# maxSignals, maxSequences, ethernetDevice)
+# portName, # asyn port name to be created
+# ethernet_address, # Low order 16 bits of Ethernet hardware address
+# portNumber, # ADC port on AIM (1 or 2)
+# maxChans, # Maximum channels for this input
+# maxSignals, # Maximum signals for this input (>1 for MCS or multiplexor)
+# maxSequences, # Maximum sequences for time resolved applications
+# ethernetDevice) # Ethernet device name on IOC
+# # Typically ei0 for Motorola 68K, dc0 for ppc, fei0 for 5100, eth0 for Linux
+AIMConfig("AIM1/1", 0xa78, 1, 2048, 1, 1, "ei0")
+AIMConfig("AIM1/2", 0xa78, 2, 2048, 1, 1, "ei0")
+AIMConfig("AIM2/1", 0xa79, 1, 2048, 1, 1, "ei0")
+dbLoadRecords("$(MCA)/mcaApp/Db/3element.db","P=xxx:med:,BASENAME=mca,N=2000")
# icbConfig(portName, ethernetAddress, icbAddress, moduleType)
# portName to give to this asyn port
# ethernetAddress - Ethernet address of module, low order 16 bits
@@ -28,6 +35,6 @@ icbConfig("icbTca2", 0xa78, 1, 3)
icbConfig("icbTca3", 0xa78, 2, 3)
-dbLoadTemplate("3element.substitutions")
+dbLoadTemplate("canberra_3.substitutions")
# END canberra_3.cmd ----------------------------------------------------------
--
GitLab