From 8130e8e1fdf7d2ec44f6f04f6cec63f9db695cad Mon Sep 17 00:00:00 2001
From: timmmooney <mooney@aps.anl.gov>
Date: Thu, 17 Feb 2005 20:25:51 +0000
Subject: [PATCH] changes to comply with tyGSAsynInit()'s new argument list
begin/end comments
---
iocBoot/iocvxWorks/serial.cmd | 26 +++++++++++++++-----------
1 file changed, 15 insertions(+), 11 deletions(-)
diff --git a/iocBoot/iocvxWorks/serial.cmd b/iocBoot/iocvxWorks/serial.cmd
index 0ecdef6..30780a4 100644
--- a/iocBoot/iocvxWorks/serial.cmd
+++ b/iocBoot/iocvxWorks/serial.cmd
@@ -1,4 +1,6 @@
-###############################################################################
+
+# BEGIN serial.cmd ------------------------------------------------------------
+
# Initialize Octal UART stuff
# tyGSOctalDrv(int maxModules)
tyGSOctalDrv(1)
@@ -12,16 +14,17 @@ tyGSOctalDrv(1)
# slot - location of module on carrier -- 0..3 for slot A..slot D
tyGSOctalModuleInit("UART_0", "232", 0x80, 0, 0)
-# int tyGSAsynInit(char *port, char *moduleName, int channel, int baud, char parity, int sbits,
-# int dbits, char handshake, char *eomstr)
-tyGSAsynInit("serial1", "UART_0", 0, 9600,'N',2,8,'N',"") /* SRS570 */
-tyGSAsynInit("serial2", "UART_0", 1,19200,'E',1,8,'N',"") /* MKS */
-tyGSAsynInit("serial3", "UART_0", 2, 9600,'E',1,7,'N',"") /* Digitel */
-tyGSAsynInit("serial4", "UART_0", 3, 9600,'N',1,8,'N',"") /* MPC */
-tyGSAsynInit("serial5", "UART_0", 4, 9600,'E',1,7,'N',"") /* McClennan PM304 */
-tyGSAsynInit("serial6", "UART_0", 5,19200,'N',1,8,'N',"") /* Keithley 2000 */
-tyGSAsynInit("serial7", "UART_0", 6, 9600,'N',1,8,'N',"") /* Oxford ILM cryometer */
-tyGSAsynInit("serial8", "UART_0", 7,19200,'N',1,8,'N',"") /* Love controllers */
+# int tyGSAsynInit(char *port, char *moduleName, int channel, int baud,
+# char parity, int sbits, int dbits, char handshake,
+# char *inputEos, char *outputEos)
+tyGSAsynInit("serial1", "UART_0", 0, 9600,'N',2,8,'N',"","") /* SRS570 */
+tyGSAsynInit("serial2", "UART_0", 1,19200,'E',1,8,'N',"","") /* MKS */
+tyGSAsynInit("serial3", "UART_0", 2, 9600,'E',1,7,'N',"","") /* Digitel */
+tyGSAsynInit("serial4", "UART_0", 3, 9600,'N',1,8,'N',"","") /* MPC */
+tyGSAsynInit("serial5", "UART_0", 4, 9600,'E',1,7,'N',"","") /* McClennan PM304 */
+tyGSAsynInit("serial6", "UART_0", 5,19200,'N',1,8,'N',"","") /* Keithley 2000 */
+tyGSAsynInit("serial7", "UART_0", 6, 9600,'N',1,8,'N',"","") /* Oxford ILM cryometer */
+tyGSAsynInit("serial8", "UART_0", 7,19200,'N',1,8,'N',"","") /* Love controllers */
# Newport MM4000 driver setup parameters:
# (1) maximum # of controllers,
@@ -130,3 +133,4 @@ dbLoadRecords("$(IP)/ipApp/Db/SR570.db", "P=xxx:,A=A1,PORT=serial1")
#loveServerDebug=1
#dbLoadRecords("$(IP)/ipApp/Db/love.db", "P=xxx:,Q=Love_0,C=0,PORT=PORT2,ADDR=1")
+# END serial.cmd --------------------------------------------------------------
--
GitLab