From a6ba34ad25fc7babba06457a67dcc6f49af2c5ea Mon Sep 17 00:00:00 2001
From: MarkRivers <rivers@cars.uchicago.edu>
Date: Wed, 18 Feb 2004 22:28:15 +0000
Subject: [PATCH] Made device addresses consistent with synApps documented
defaults
---
iocBoot/iocvxWorks/st.cmd | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/iocBoot/iocvxWorks/st.cmd b/iocBoot/iocvxWorks/st.cmd
index 4760a01..971bfe1 100644
--- a/iocBoot/iocvxWorks/st.cmd
+++ b/iocBoot/iocvxWorks/st.cmd
@@ -140,7 +140,7 @@ omsSetup(2, 8, 0xFC00, 180, 5, 10)
# (1)cards, (2)axes per card, (3)base address(short, 4k boundary),
# (4)interrupt vector (0=disable or 64 - 255), (5)interrupt level (1 - 6),
# (6)motor task polling rate (min=1Hz,max=60Hz)
-oms58Setup(3, 8, 0x3000, 190, 5, 10)
+oms58Setup(3, 8, 0x4000, 190, 5, 10)
# Highland V544 driver setup parameters:
# (1)cards, (2)axes per card, (3)base address(short, 4k boundary),
@@ -366,7 +366,7 @@ dbLoadRecords("$(MCA)/mcaApp/Db/icb_adc.db","P=xxx:,ADC=icbAdc1,CARD=0,SERVER=ic
#dbLoadRecords("$(MCA)/mcaApp/Db/simple_mca.db","P=xxx:mcs:,M=mca8,DTYP=Struck STR7201 MCS,PREC=3,INP=#C0 S7 @,CHANS=1000")
# STR7201Setup(int numCards, int baseAddress, int interruptVector, int interruptLevel)
-#STR7201Setup(2, 0xA0000000, 210, 6)
+#STR7201Setup(2, 0x90000000, 220, 6)
# STR7201Config(int card, int maxSignals, int maxChans, int 1=enable internal 25MHZ clock)
#STR7201Config(0, 8, 1000, 0)
@@ -506,7 +506,7 @@ dbLoadTemplate("ip330Scan.substitutions")
# devA32VmeConfig(0, 0x80000000, 44, 0, 0)
#####################################################
# Configure the MSL MRD 100 module.....
-#devA32VmeConfig(0, 0xa0000200, 30, 0xa0, 5)
+#devA32VmeConfig(0, 0xB0000200, 30, 0xa0, 5)
#dbLoadRecords("stdApp/Db/msl_mrd101.db","C=0,S=01,ID1=01,ID2=01us", std)
--
GitLab