From c2009ba2f881d29434f66e2e7c8b26d3fc3c9d59 Mon Sep 17 00:00:00 2001
From: timmmooney <mooney@aps.anl.gov>
Date: Fri, 17 Dec 2004 21:46:25 +0000
Subject: [PATCH] Changed GPIB_OI_block to deviceCmdReply
---
iocBoot/iocvxWorks/st.cmd | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)
diff --git a/iocBoot/iocvxWorks/st.cmd b/iocBoot/iocvxWorks/st.cmd
index 1de9f3f..3a0a37a 100644
--- a/iocBoot/iocvxWorks/st.cmd
+++ b/iocBoot/iocvxWorks/st.cmd
@@ -53,10 +53,13 @@ iocxxxVX_registerRecordDeviceDriver(pdbbase)
< save_restore.cmd
# Industry Pack support
-#< industryPack.cmd
+< industryPack.cmd
+
+# serial support
+< serial.cmd
# VME devices
-#< vme.cmd
+< vme.cmd
# CAMAC hardware
#<camac.cmd
@@ -71,12 +74,12 @@ dbLoadTemplate("motor.substitutions")
dbLoadRecords("$(STD)/stdApp/Db/all_com_16.db","P=xxx:")
### Insertion-device control
-dbLoadRecords("$(STD)/stdApp/Db/IDctrl.db","P=xxx:,xx=02us")
+#dbLoadRecords("$(STD)/stdApp/Db/IDctrl.db","P=xxx:,xx=02us")
### Scan-support software
# crate-resident scan. This executes 1D, 2D, 3D, and 4D scans, and caches
# 1D data, but it doesn't store anything to disk. (See 'saveData' below for that.)
-dbLoadRecords("$(SSCAN)/sscanApp/Db/scan.db","P=xxx:,MAXPTS1=8000,MAXPTS2=200,MAXPTS3=10,MAXPTS4=10,MAXPTSH=8000")
+dbLoadRecords("$(SSCAN)/sscanApp/Db/scan.db","P=xxx:,MAXPTS1=8000,MAXPTS2=1000,MAXPTS3=10,MAXPTS4=10,MAXPTSH=8000")
# A set of scan parameters for each positioner. This is a convenience
# for the user. It can contain an entry for each scannable thing in the
@@ -152,8 +155,9 @@ dbLoadRecords("$(CALC)/calcApp/Db/interp.db", "P=xxx:,N=2000")
dbLoadRecords("$(CALC)/calcApp/Db/arrayTest.db", "P=xxx:,N=2000")
### GPIB support ###
-# GPIB O/I block (generic gpib record with format and parse string calcs)
-#dbLoadRecords("$(IP)/ipApp/Db/GPIB_OI_block.db","P=xxx:,N=1,L=10")
+# send impromptu message to gpib device, parse reply
+# (was GPIB_OI_block)
+#dbLoadRecords("$(IP)/ipApp/Db/deviceCmdReply.db","P=xxx:,N=1,PORT=gpib1,ADDR=1,OMAX=100,IMAX=100")
# Heidenhain AWE1024 at GPIB address $(A)
#dbLoadRecords("$(IP)/ipApp/Db/HeidAWE1024.db", "P=xxx:,L=10,A=6")
@@ -209,13 +213,13 @@ seq &hrCtl, "P=xxx:, N=1, M_PHI1=m9, M_PHI2=m10, logfile=hrCtl1.log"
# The task is actually named "save_restore".
# Note that you can reload these sets after creating them: e.g.,
# reload_monitor_set("auto_settings.req",30,"P=xxx:")
+#save_restoreDebug=20
#
# save positions every five seconds
create_monitor_set("auto_positions.req",5,"P=xxx:")
# save other things every thirty seconds
create_monitor_set("auto_settings.req",30,"P=xxx:")
-
### Start the saveData task.
# saveData_MessagePolicy
# 0: wait forever for space in message queue, then send message
--
GitLab