From f065926f5b06f786d13cd4cadce519be6e633c25 Mon Sep 17 00:00:00 2001
From: MarkRivers <rivers@cars.uchicago.edu>
Date: Tue, 27 Jan 2004 17:42:04 +0000
Subject: [PATCH] 2 replacement files, st_mpfserver.cmd.vxWorks,
st_mpfserver.cmd.unix
---
iocBoot/iocxxx/st_mpfserver.cmd | 186 --------------------------------
1 file changed, 186 deletions(-)
delete mode 100644 iocBoot/iocxxx/st_mpfserver.cmd
diff --git a/iocBoot/iocxxx/st_mpfserver.cmd b/iocBoot/iocxxx/st_mpfserver.cmd
deleted file mode 100644
index 46b33a2..0000000
--- a/iocBoot/iocxxx/st_mpfserver.cmd
+++ /dev/null
@@ -1,186 +0,0 @@
-# This configures the MPF server stuff
-
-# slot a: IP-Octal (serial RS-232)
-# slot b: EMPTY
-# slot c: EMPTY
-# slot d: EMPTY
-
-###############################################################################
-# Initialize IP carrier
-# ipacAddCarrier(ipac_carrier_t *pcarrier, char *cardParams)
-# pcarrier - pointer to carrier driver structure
-# cardParams - carrier-specific init parameters
-
-# Select for MVME162 or MVME172 CPU board IP carrier.
-carrier = "mv162"
-ipacAddCarrier(&ipmv162, "A:l=3,3 m=0xe0000000,64;B:l=3,3 m=0xe0010000,64;C:l=3,3 m=0xe0020000,64;D:l=3,3 m=0xe0030000,64")
-
-# Select for SBS VIPC616-01 IP carrier.
-#carrier = "VIPC616_01"
-#ipacAddCarrier(&vipc616_01, "0x6000,D00000,128")
-
-initIpacCarrier(carrier, 0)
-
-###############################################################################
-# Initialize GPIB stuff
-
-#initGpibGsTi9914("GS-IP488-0",carrier,"IP_b",104)
-#initGpibServer("GPIB0","GS-IP488-0",1024,1000)
-
-###############################################################################
-# Initialize Octal UART stuff
-initOctalUART("octalUart0",carrier,"IP_a",8,100)
-
-# initOctalUARTPort(char* portName,char* moduleName,int port,int baud,
-# char* parity,int stop_bits,int bits_char,char* flow_control)
-# 'baud' is the baud rate. 1200, 2400, 4800, 9600, 19200, 38400
-# 'parity' is "E" for even, "O" for odd, "N" for none.
-# 'bits_per_character' = {5,6,7,8}
-# 'stop_bits' = {1,2}
-# 'flow_control' is "N" for none, "H" for hardware
-#
-# Don't leave any of these uninitialized, even if you aren't going to use them.
-
-initOctalUARTPort("UART[0]","octalUart0",0, 9600,"N",2,8,"N") /* SRS570 */
-initOctalUARTPort("UART[1]","octalUart0",1, 9600,"N",2,8,"N") /* SRS570 */
-initOctalUARTPort("UART[2]","octalUart0",2, 9600,"N",2,8,"N") /* SRS570 */
-initOctalUARTPort("UART[3]","octalUart0",3, 9600,"N",2,8,"N") /* SRS570 */
-initOctalUARTPort("UART[4]","octalUart0",4, 9600,"N",2,8,"N") /* ? */
-initOctalUARTPort("UART[5]","octalUart0",5, 9600,"N",2,8,"N") /* ? */
-initOctalUARTPort("UART[6]","octalUart0",6, 9600,"N",2,8,"N") /* ? */
-initOctalUARTPort("UART[7]","octalUart0",7, 9600,"N",1,8,"N") /* Keithley 2K */
-
-initSerialServer("a-Serial[0]","UART[0]",1000,20,"\r",1)
-initSerialServer("a-Serial[1]","UART[1]",1000,20,"\r",1)
-initSerialServer("a-Serial[2]","UART[2]",1000,20,"\r",1)
-initSerialServer("a-Serial[3]","UART[3]",1000,20,"\r",1)
-initSerialServer("a-Serial[4]","UART[4]",1000,20,"\r",1)
-initSerialServer("a-Serial[5]","UART[5]",1000,20,"\r",1)
-initSerialServer("a-Serial[6]","UART[6]",1000,20,"\r",1)
-initSerialServer("a-Serial[7]","UART[7]",1000,20,"\r",1)
-
-###############################################################################
-# Initialize Systran DAC
-# initDAC128V(char *serverName, int carrier, int slot, int queueSize)
-# serverName = name to give this server
-# carrier = IPAC carrier number (0, 1, etc.)
-# slot = IPAC slot (0,1,2,3, etc.)
-# queueSize = size of output queue for EPICS
-# Example: initDAC128V("DAC1", 0, 3, 20)
-#initDAC128V("DAC1",0,2,20)
-
-###############################################################################
-# Initialize Acromag ADC
-# Ip330 *pIp330 = initIp330(
-# const char *moduleName, const char *carrierName, const char *siteName,
-# const char *typeString, const char *rangeString,
-# int firstChan, int lastChan,
-# int maxClients, int intVec)
-#
-# pIp330 = pointer to the Ip330 object, needed by configIp330(), and
-# needed to initialize the application-specific classes
-# moduleName = name to give this module
-# carrierName = name of IPAC carrier from initIpacCarrier() above
-# siteName = name of IP site on the carrier, e.g. "IP_a"
-# typeString = "D" or "S" for differential or single-ended
-# rangeString = "-5to5","-10to10","0to5", or "0to10"
-# This value must match hardware setting selected
-# firstChan = first channel to be digitized. This must be in the range:
-# 0 to 31 (single-ended)
-# 0 to 15 (differential)
-# lastChan = last channel to be digitized
-# maxClients = Maximum number of Ip330 tasks which will attach to this
-# Ip330 module. For example Ip330Scan, Ip330Sweep, etc. This
-# does not refer to the number of EPICS clients. A value of
-# 10 should certainly be safe.
-# intVec = Interrupt vector
-
-#pIp330 = initIp330("d-ADC", carrier, "IP_d", "D", "-10to10", 0, 15, 10, 205)
-
-# int configIp330(Ip330 *pIp330, scanModeType scanMode,
-# const char *triggerString, int microSecondsPerScan,
-# int secondsBetweenCalibrate)
-#
-# pIp330 = pointer to the Ip330 object, returned by initIp330 above
-# scanMode = scan mode:
-# 0 = disable
-# 1 = uniformContinuous
-# 2 = uniformSingle
-# 3 = burstContinuous (normally recommended)
-# 4 = burstSingle
-# 5 = convertOnExternalTriggerOnly
-# triggerString = "Input" or "Output". Selects the direction of the external
-# trigger signal.
-# microSecondsPerScan = repeat interval to digitize all channels
-# The minimum theoretical time is 15 microseconds times the
-# number of channels, but a practical limit is probably 100
-# microseconds.
-# secondsBetweenCalibrate = number of seconds between calibration cycles.
-# If zero then there will be no periodic calibration, but
-# one calibration will still be done at initialization.
-
-#configIp330(pIp330, 3, "Input", 1000, 60)
-
-
-# initIp330Scan(Ip330 *pIp330, char *serverName, int firstChan, int lastChan,
-# int milliSecondsToAverage, int queueSize)
-# pIp330 = pointer returned by initIp330 above
-# serverName = name to give this server
-# firstChan = first channel to be used by Ip330Scan. This must be in the
-# range firstChan to lastChan specified in initIp330
-# lastChan = last channel to be used by Ip330Scan. This must be in the range
-# firstChan to lastChan specified in initIp330
-# milliSecondsToAverage = number of milliseconds to average for values
-# returned to EPICS
-# queueSize = size of output queue for EPICS
-
-#initIp330Scan(pIp330,"d-Ip330Scan",0,15,100,20)
-
-
-# initIp330Sweep(Ip330 *pIp330, char *serverName, int firstChan, int lastChan,
-# int maxPoints, int queueSize)
-# pIp330 = pointer returned by initIp330 above
-# serverName = name to give this server
-# firstChan = first channel to be used by Ip330Sweep. This must be in the
-# range firstChan to lastChan specified in initIp330
-# lastChan = last channel to be used by Ip330Sweep. This must be in the
-# range firstChan to lastChan specified in initIp330
-# maxPoints = maximum number of points in a sweep. The amount of memory
-# allocated will be maxPoints*(lastChan-firstChan+1)*4 bytes
-# queueSize = size of output queue for EPICS
-
-#initIp330Sweep(pIp330,"d-Ip330Sweep",0,12,2048,20)
-
-
-# initIp330PID(char *serverName, Ip330 *pIp330, int ADCChan,
-# DAC128V *pDAC128V, int DACChan,
-# double KP, double KI, double KD,
-# int interval, int feedbackOn, int lowLimit, int highLimit,
-# int queueSize)
-# serverName = name to give this server
-# pIp330 = pointer returned by initIp330 above
-# ADCChan = ADC channel to be used by Ip330PID. This must be in the range
-# firstChan to lastChan specified in initIp330
-# pDAC128V = pointer returned by initDAC128V above
-# DACChan = DAC channel to be used by Ip330PID, in the range 0 to 7
-# KP = proportional gain, must be a floating point value
-# KI = integral gain, must be a floating point value
-# KD = derivative gain, must be a floating point value
-# interval = number of microseconds per feedback loop
-# feedbackOn = initial state of feedback. 0 = off, 1 = on
-# lowLimit = lower limit on the DAC output, in the range 0-2047
-# highLimit = upper limit on the DAC output, in the range 0-2047
-# queueSize = size of output queue for EPICS
-
-#pIp330PID = initIp330PID("Ip330PID_1", pIp330, 0, pDAC128V, 0, 20)
-#configIp330PID(pIp330PID, .1, 10., 0., 1000, 0, 500, 1500)
-
-###############################################################################
-# Initialize Greenspring IP-Unidig
-
-#initIpUnidig("b-Unidig", carrier, "IP_b", 20)
-
-# Love controllers
-#initOctalUARTPort("UART[7]","octalUart0",7,19200,"N",1,8,"N")
-#initLoveServer("PORT7","UART[7]",112)
-
--
GitLab