#!/bin/csh

# caller (typically: start_epics) MUST make these definitions
# setenv EPICS_APP /home/oxygen/MOONEY/epics/synApps_5_5/support/xxx
# setenv EPICS_APP_ADL_DIR ${EPICS_APP}/xxxApp/op/adl

set output = `perl $EPICS_APP/release.pl $EPICS_APP`
$output

#######################################
# Prepare MEDM path
# EDP is temporary EPICS_DISPLAY_PATH
#
alias append_EDP 'setenv EDP ${EDP}:\!*'
setenv EDP  .
append_EDP  ${EPICS_APP_ADL_DIR}
append_EDP  ${AREA_DETECTOR}/ADApp/op/adl
append_EDP  ${AUTOSAVE}/asApp/op/adl
append_EDP  ${BUSY}/busyApp/op/adl
append_EDP  ${CALC}/calcApp/op/adl
append_EDP  ${CAMAC}/camacApp/op/adl
append_EDP  ${DAC128V}/dac128VApp/op/adl
append_EDP  ${DELAYGEN}/delaygenApp/op/adl
append_EDP  ${DEVIOCSTATS}/op/adl
append_EDP  ${DXP}/dxpApp/op/adl
append_EDP  ${IP}/ipApp/op/adl
append_EDP  ${IP330}/ip330App/op/adl
append_EDP  ${IPUNIDIG}/ipUnidigApp/op/adl
append_EDP  ${LOVE}/loveApp/op/adl
append_EDP  ${MCA}/mcaApp/op/adl
append_EDP  ${MOTOR}/motorApp/op/adl
append_EDP  ${OPTICS}/opticsApp/op/adl
append_EDP  ${QUADEM}/quadEMApp/op/adl
append_EDP  ${SSCAN}/sscanApp/op/adl
append_EDP  ${STD}/stdApp/op/adl
append_EDP  ${VME}/vmeApp/op/adl
append_EDP  ${ASYN}/medm
append_EDP  ${VAC}/vacApp/op/adl
append_EDP  ${SOFTGLUE}/softGlueApp/op/adl

if (! ${?EPICS_DISPLAY_PATH}) then
setenv EPICS_DISPLAY_PATH ${EDP}
else
setenv EPICS_DISPLAY_PATH ${EDP}:${EPICS_DISPLAY_PATH}
endif

if (! ${?MEDM_EXEC_LIST}) setenv MEDM_EXEC_LIST 'Probe;probe &P &'

#setenv EPICS_CA_ADDR_LIST "164.54.53.126"

# This should agree with the environment variable set by the ioc
# see 'putenv "EPICS_CA_MAX_ARRAY_BYTES=64008"' in iocBoot/ioc<target>/st.cmd
setenv EPICS_CA_MAX_ARRAY_BYTES 64008