### save_restore setup
#
# The rest this file does not require modification for standard use, but...
# If you want save_restore to manage its own NFS mount, specify the name and
# IP address of the file server to which save files should be written.
# This currently is supported only on vxWorks.
#save_restoreSet_NFSHost("oxygen", "164.54.52.4")

# status-PV prefix
save_restoreSet_status_prefix("xxx:")
# Debug-output level
save_restoreSet_Debug(0)

# Ok to save/restore save sets with missing values (no CA connection to PV)?
save_restoreSet_IncompleteSetsOk(1)
# Save dated backup files?
save_restoreSet_DatedBackupFiles(1)

# Number of sequenced backup files to write
save_restoreSet_NumSeqFiles(3)
# Time interval between sequenced backups
save_restoreSet_SeqPeriodInSeconds(300)

# specify where save files should be
set_savefile_path("$(STARTUP)", "autosave")

# specify what save files should be restored.  Note these files must be
# in the directory specified in set_savefile_path(), or, if that function
# has not been called, from the directory current when iocInit is invoked
set_pass0_restoreFile("auto_positions.sav")
set_pass0_restoreFile("auto_settings.sav")
set_pass1_restoreFile("auto_settings.sav")

# specify directories in which to to search for included request files
# Note cdCommands defines 'startup', but envPaths does not
set_requestfile_path("$(STARTUP)", "")
set_requestfile_path("$(STARTUP)", "autosave")
set_requestfile_path("$(AUTOSAVE)", "asApp/Db")
set_requestfile_path("$(CALC)", "calcApp/Db")
#set_requestfile_path("$(CAMAC)", "camacApp/Db")
set_requestfile_path("$(CCD)", "ccdApp/Db")
set_requestfile_path("$(DAC128V)", "dac128VApp/Db")
set_requestfile_path("$(DXP)", "dxpApp/Db")
set_requestfile_path("$(IP)", "ipApp/Db")
set_requestfile_path("$(IP330)", "ip330App/Db")
set_requestfile_path("$(IPUNIDIG)", "ipUnidigApp/Db")
#set_requestfile_path("$(LOVE)", "loveApp/Db")
set_requestfile_path("$(MCA)", "mcaApp/Db")
set_requestfile_path("$(MOTOR)", "motorApp/Db")
set_requestfile_path("$(OPTICS)", "opticsApp/Db")
set_requestfile_path("$(QUADEM)", "quadEMApp/Db")
set_requestfile_path("$(SSCAN)", "sscanApp/Db")
set_requestfile_path("$(STD)", "stdApp/Db")
set_requestfile_path("$(VME)", "vmeApp/Db")

dbLoadRecords("$(AUTOSAVE)/asApp/Db/save_restoreStatus.db", "P=xxx:")