RSXS/Kappa-Diffractometer/Alignment.md

 ___
 ___
 
-# Content
+# content
 
 - [coming out of shutdown](#coming-out-of-shutdown)
 - [energy calibration](#energy-calibration)
 - [align M3R pitch to center of rotation](#align-m3r-pitch-to-center-of-rotation)
 - [determine kth_offset](#determine-kth_offset)
 - [align M4R pitch to center of rotation](#align-m4r-pitch-to-center-of-rotation)
-- [determined kap offset](#determined-kap-offset)
-- [determined kphi and phi 0](#determined-kphi-and-phi-0)
+- [determined kap offset](#determine-kap-offset)
+- [determined kphi and phi 0](#determine-kphi-and-phi-0)
 
 ___
 ___
 
 
-## Coming out of shutdown
+## coming out of shutdown
 1) home motors using procedure in [elog](https://logbook.xray.aps.anl.gov/29id/RSXS+Endstation/44) 
 2) check tth minimum/maximum allowed position in extended panel (PI software): after homing tth PI/dial position will be set to either of those, which will prevent it to move it in that direction
 3) sync EPICS values:
@@ -139,7 +139,7 @@ align_z0_chi0()
 
 ---------------------------------------
 
-## determined kap offset
+## determine kap offset
 
 
 1) compare kap scans at (th,chi,phi) = (90,0,90) and (270,0,-90):
@@ -154,7 +154,7 @@ dscankap(-4,4,0.1)
 
 ---------------------------------------
 
-## determined kphi and phi 0
+## determine kphi and phi 0
 
 <ol>
 <li>