Updated commands for MSL/MRD module to new version

iocBoot/iocvxWorks/vme.cmd

@@ -96,20 +96,18 @@ dbLoadRecords("$(VME)/vmeApp/Db/vme.db", "P=xxx:,Q=vme1")
 ### GP307 Vacuum Controller
 #dbLoadRecords("$(VME)/vmeApp/Db/gp307.db","P=xxx:")
 
-# Machine-status board (MRD 100)
+# Machine Status Link (MSL) board (MRD 100)
 #####################################################
-# dev32VmeConfig(card,a32base,nreg,iVector,iLevel)
-#    card    = card number
-#    a32base = base address of card
-#    nreg    = number of A32 registers on this card
-#    iVector = interrupt vector (MRD100 Only !!)
-#    iLevel  = interrupt level  (MRD100 Only !!)
-#  For Example
-#   devA32VmeConfig(0, 0x80000000, 44, 0, 0)
+# devAvmeMRDConfig( base, vector, level )
+#    base   = base address of card
+#    vector = interrupt vector
+#    level  = interrupt level
+# For Example
+#    devAvmeMRDConfig(0xA0000200, 0xA0, 5)
 #####################################################
 #  Configure the MSL MRD 100 module.....
-#devA32VmeConfig(0, 0xB0000200, 30, 0xa0, 5)
-#dbLoadRecords("$(STD)/stdApp/Db/msl_mrd101.db","C=0,S=01,ID1=01,ID2=01us")
+#devAvmeMRDConfig(0xB0000200, 0xA0, 5)    
+#dbLoadRecords("../../vmeApp/Db/msl_mrd100.db","C=0,S=01,ID1=01,ID2=01us")
 
 # Allen-Bradley 6008 scanner
 #abConfigNlinks 1