- Eliminate mpfServLib.

- Reuse "st_mpfserver.cmd".

iocBoot/iocxxx/st1.cmd

+cd ""
 < ../nfsCommands
+< cdCommands.68K
+< MPFconfig.cmd
 
-cd "/home/beams/BCDA/epics/synApps_4_3/2id/iocBoot/iocxxx"
-
-shellPromptSet "iocxxx1> "
-
-< cdCommands
- 
 cd appbin
 ld < mpfLib
-ld < mpfServLib
+ld < ipLib
+ld < mpfserialserverLib
+# Uncomment, as needed.
+#ld < mpfgpibserverLib
+#ld < dac128VLib
 
 cd startup
-
-# For mv162
-ipacAddCarrier(&ipmv162, "A:m=0xe0000000,64 l=3,3;D:m=0xe0010000,64 l=3,3")
-
-carrier = "ipac"
-initIpacCarrier(carrier, 0)
-
 #start message router
 routerInit
-tcpMessageRouterServerStart(1,9900,"164.54.113.yyy",1500,40)
-
-# slot a: IP-Octal (serial RS-232)
-# slot b: 
-# slot c: 
-# slot d: 
-
+tcpMessageRouterServerStart(1, 9900, Remote_IP, 1500, 40)
 
-###############################################################################
-# Initialize Octal UART stuff
-initOctalUART("octalUart0",carrier,"IP_a",8,100)
+< st_mpfserver.cmd
 
-# initOctalUARTPort(char* portName,char* moduleName,int port,int baud,
-#                   char* parity,int stop_bits,int bits_char,char* flow_control)
-# 'baud' is the baud rate. 1200, 2400, 4800, 9600, 19200, 38400
-# 'parity' is "E" for even, "O" for odd, "N" for none.
-# 'bits_per_character' = {5,6,7,8}
-# 'stop_bits' = {1,2}
-# 'flow_control' is "N" for none, "H" for hardware
-# Port 0 is Generic Serial Record
-
-initOctalUARTPort("UART[0]","octalUart0",0, 9600,"N",1,8,"N") /* Keithley 2000 */
-initOctalUARTPort("UART[1]","octalUart0",1, 9600,"N",2,8,"N") /* SRS570 */
-initOctalUARTPort("UART[2]","octalUart0",2, 19200,"N",1,8,"N") /* Love Ctrl */
-initOctalUARTPort("UART[3]","octalUart0",3,19200,"N",1,8,"N") /* MM4000 */
-initOctalUARTPort("UART[4]","octalUart0",4, 9600,"N",2,8,"N") /* SRS570 */
-initOctalUARTPort("UART[5]","octalUart0",5, 9600,"N",1,8,"N") /* Keithley 2000 */
-initOctalUARTPort("UART[6]","octalUart0",6, 9600,"N",1,8,"N") /* SMART PC */
-initOctalUARTPort("UART[7]","octalUart0",7, 9600,"N",1,8,"N")
-
-initSerialServer("a-Serial[0]","UART[0]",1000,20,"\r",1)
-initSerialServer("a-Serial[1]","UART[1]",1000,20,"\r",1)
-initSerialServer("a-Serial[2]","UART[2]",1000,20,"\r",1)
-initSerialServer("a-Serial[3]","UART[3]",1000,20,"\r",1)
-initSerialServer("a-Serial[4]","UART[4]",1000,20,"\r",1)
-initSerialServer("a-Serial[5]","UART[5]",1000,20,"\r",1)
-initSerialServer("a-Serial[6]","UART[6]",1000,20,"\r",1)
-
-# Love controllers
-#initOctalUARTPort("UART[7]","octalUart0",7,19200,"N",1,8,"N")
-#initLoveServer("PORT7","UART[7]",112)
-
-###############################################################################
-# Initialize GPIB stuff
-
-# Mark's version
-#initGpibGsTi9914("GS-IP488-0",carrier,"IP_b",104)
-#initGpibServer("GPIB0","GS-IP488-0",1024,1000)
-# Ron's version
-#initGpibGsTi9914("motorMod", carrier, "IP_b", 123)
-#initGpibServer("gpib-server", "motorMod", 100, 30)
-
-###############################################################################
-# Initialize Systran DAC
-# initDAC128V(char *serverName, char *carrierName, char *siteName,
-#             int queueSize)
-# serverName  = name to give this server
-# carrierName = name of IPAC carrier from initIpacCarrier above
-# siteName    = name of IP site, e.g. "IP_a"
-# queueSize   = size of output queue for EPICS
-#
+shellPromptSet "iocxxx1> "
 
-#initDAC128V("c-DAC",carrier,"IP_c",20)