Skip to content
Snippets Groups Projects
Commit 9755b101 authored by klang's avatar klang
Browse files

Removing extra files

parent 32341853
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
Showing
with 0 additions and 533 deletions
iocBoot/iocCygwin/AAREADME.txt deleted 100644 → 0
+ 0
− 2
View file @ 32341853
This directory is out of date, and is included for reference only. It has
not been completely updated for synApps 5.8.
iocBoot/iocCygwin/Makefile deleted 100644 → 0
+ 0
− 5
View file @ 32341853
TOP = ../..
include $(TOP)/configure/CONFIG
ARCH = cygwin-x86
TARGETS = envPaths
include $(TOP)/configure/RULES.ioc
iocBoot/iocCygwin/areaDetector.cmd deleted 100644 → 0
+ 0
− 33
View file @ 32341853
epicsEnvSet EPICS_CA_MAX_ARRAY_BYTES 2000100
# Create a simDetector driver
simDetectorConfig("SIM1", 640, 480, 1, 50, 50000000)
dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/ADBase.template", "P=xxx:,R=SIM1:cam1:,PORT=SIM1,ADDR=0,TIMEOUT=1")
dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/simDetector.template","P=xxx:,R=SIM1:cam1:,PORT=SIM1,ADDR=0,TIMEOUT=1")
# Create a second simDetector driver
simDetectorConfig("SIM2", 300, 200, 1, 50, 50000000)
dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/ADBase.template", "P=xxx:,R=SIM1:cam2:,PORT=SIM2,ADDR=0,TIMEOUT=1")
dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/simDetector.template","P=xxx:,R=SIM1:cam2:,PORT=SIM2,ADDR=0,TIMEOUT=1")
# Create a standard arrays plugin, set it to get data from first simDetector driver.
NDStdArraysConfigure("SIM1Image", 3, 0, "SIM1", 0, 2000000)
dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template", "P=xxx:,R=image1:,PORT=SIM1Image,ADDR=0,TIMEOUT=1,NDARRAY_PORT=SIM1,NDARRAY_ADDR=0")
dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDStdArrays.template", "P=xxx:,R=image1:,PORT=SIM1Image,ADDR=0,TIMEOUT=1,TYPE=Int8,FTVL=UCHAR,NELEMENTS=1392640")
# Create a standard arrays plugin, set it to get data from second simDetector driver.
NDStdArraysConfigure("SIM2Image", 1, 0, "SIM2", 0, 2000000)
dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template", "P=xxx:,R=image2:,PORT=SIM2Image,ADDR=0,TIMEOUT=1,NDARRAY_PORT=SIM1,NDARRAY_ADDR=0")
dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDStdArrays.template", "P=xxx:,R=image2:,PORT=SIM2Image,ADDR=0,TIMEOUT=1,TYPE=Int8,FTVL=UCHAR,NELEMENTS=1392640")
# Load the database to use with Stephen Mudie's IDL code
#dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/EPICS_AD_Viewer.template", "P=xxx:, R=image1:")
# Create a file saving plugin
NDFileNetCDFConfigure("SIM1File", 20, 0, "SIM1", 0)
dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template", "P=xxx:,R=netCDF1:,PORT=SIM1File,ADDR=0,TIMEOUT=1,NDARRAY_PORT=SIM1,NDARRAY_ADDR=0")
dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDFile.template", "P=xxx:,R=netCDF1:,PORT=SIM1File,ADDR=0,TIMEOUT=1")
# Create an ROI plugin
NDROIConfigure("SIM1ROI", 20, 0, "SIM1", 0, 8, 20, 20000000)
dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDPluginBase.template", "P=xxx:,R=ROI1:, PORT=SIM1ROI,ADDR=0,TIMEOUT=1,NDARRAY_PORT=SIM1,NDARRAY_ADDR=0")
dbLoadRecords("$(AREA_DETECTOR)/ADApp/Db/NDROI.template", "P=xxx:,R=ROI1:, PORT=SIM1ROI,ADDR=0,TIMEOUT=1")
iocBoot/iocCygwin/asynRecord.substitutions deleted 100644 → 0
+ 0
− 9
View file @ 32341853
file "$(ASYN)/db/asynRecord.db"
{
pattern
{P R PORT ADDR OMAX IMAX}
{xxx: asyn_1 serial1 0 256 256}
{xxx: asyn_2 serial2 0 256 256}
{xxx: asyn_3 serial3 0 256 256}
{xxx: asyn_4 serial4 0 256 256}
}
iocBoot/iocCygwin/auto_positions.req deleted 100644 → 0
+ 0
− 8
View file @ 32341853
$(P)m1.DVAL
$(P)m2.DVAL
$(P)m3.DVAL
$(P)m4.DVAL
$(P)m5.DVAL
$(P)m6.DVAL
$(P)m7.DVAL
$(P)m8.DVAL
iocBoot/iocCygwin/auto_settings.req deleted 100644 → 0
+ 0
− 50
View file @ 32341853
file motor_settings.req P=$(P),M=m1
file motor_settings.req P=$(P),M=m2
file motor_settings.req P=$(P),M=m3
file motor_settings.req P=$(P),M=m4
file scanParms_settings.req P=$(P),M=m1
file scanParms_settings.req P=$(P),M=m2
file scanParms_settings.req P=$(P),M=m3
file scanParms_settings.req P=$(P),M=m4
#file table_settings.req P=$(P),T=table1,Q=table1
file standardScans_settings.req P=$(P)
file saveData_settings.req P=$(P)
# Kohzu monochromator
##$(P)BraggHAO.VAL
##$(P)BraggKAO.VAL
##$(P)BraggLAO.VAL
##$(P)BraggAAO.VAL
##$(P)BraggTypeMO.VAL
##$(P)KohzuMode2MO.VAL
##$(P)Kohzu_yOffsetAO.VAL
# Io calc
#file Io_settings.req P=xxx:Io:
### user calcs. Disabled on startup unless the xxxEnable PV is
### autosaved.
file userCalcs10_settings.req P=$(P)
$(P)userCalcEnable
file userTransforms10_settings.req P=$(P)
$(P)userTranEnable
file userStringCalcs10_settings.req P=$(P)
$(P)userStringCalcEnable
file userArrayCalcs10_settings.req P=$(P)
$(P)userArrayCalcEnable
file userStringSeqs10_settings.req P=$(P)
$(P)userStringSeqEnable
file userAve10_settings.req P=$(P)
### PID_based feedback
#file fb_epid.req P=$(P)epid1
iocBoot/iocCygwin/fb_epid.substitutions deleted 100644 → 0
+ 0
− 16
View file @ 32341853
# $Id$
file "$(OPTICS)/opticsApp/Db/fb_epid.db"
{
{
P=xxx:epid1,
IN=xxx:epid1:sim.VAL,
OUT=xxx:epid1:sim.D,
MODE=PID,
CALC=A,
PERMIT1="xxx:epid1:on.VAL",
PERMIT2="",
PERMIT3="",
PERMIT4=""
}
}
iocBoot/iocCygwin/motor.substitutions deleted 100644 → 0
+ 0
− 12
View file @ 32341853
file "$(MOTOR)/db/motor.db"
{
pattern
{P, N, M, DTYP, C, S, DESC, EGU, DIR, VELO, VBAS, ACCL, BDST, BVEL, BACC, MRES, PREC, DHLM, DLLM, INIT}
{xxx:, 1, "m$(N)", "MM4000", 0, 0, "motor $(N)", degrees, Pos, 10, 0., 1., 0, 1, .2, 1e-3, 3, 100, -100, ""}
{xxx:, 2, "m$(N)", "MM4000", 0, 1, "motor $(N)", degrees, Pos, 60, 0., 1.5, 0, 1, .2, 1e-3, 3, 100, -100, ""}
{xxx:, 3, "m$(N)", "MM4000", 0, 2, "motor $(N)", degrees, Pos, 60, 0., 1., 0, 1, .2, 1e-3, 3, 100, -100, ""}
{xxx:, 4, "m$(N)", "ACS MCB-4B", 0, 0, "motor $(N)", steps, Pos, 1000., 1, .2, 0, 1, .2, 1, 1, 1e6, -1e6, ""}
{xxx:, 5, "m$(N)", "ACS MCB-4B", 0, 1, "motor $(N)", degrees, Pos, 1000., 1, .2, 0, 1, .2, 1, 1, 100, -100, ""}
{xxx:, 6, "m$(N)", "ACS MCB-4B", 0, 2, "motor $(N)", degrees, Pos, 1000., 1, .2, 0, 1, .2, 1, 1, 100, -100, ""}
{xxx:, 7, "m$(N)", "ACS MCB-4B", 0, 3, "motor $(N)", degrees, Pos, 1000., 1, .2, 0, 1, .2, 1, 1, 100, -100, ""}
}
iocBoot/iocCygwin/motorSim.cmd deleted 100644 → 0
+ 0
− 9
View file @ 32341853
# The is the ASYN example for communication to 4 simulated motors
# "#!" marks lines that can be uncommented.
dbLoadTemplate("motorSim.substitutions")
# Create simulated motors: ( start card , start axis , low limit, high limit, home posn, # cards, # axes to setup)
motorSimCreate( 0, 0, -32000, 32000, 0, 1, 8 )
# Setup the Asyn layer (portname, low-level driver drvet name, card, number of axes on card)
drvAsynMotorConfigure("motorSim1", "motorSim", 0, 8)
iocBoot/iocCygwin/motorSim.substitutions deleted 100644 → 0
+ 0
− 13
View file @ 32341853
file "$(MOTOR)/db/asyn_motor.db"
{
pattern
{P, N, M, DTYP, PORT, ADDR, DESC, EGU, DIR, VELO, VBAS, ACCL, BDST, BVEL, BACC, MRES, PREC, DHLM, DLLM, INIT}
{xxx:, 1, "m$(N)", "asynMotor", motorSim1, 0, "motor $(N)", degrees, Pos, 1, .1, .2, 0, 1, .2, 0.01, 5, 100, -100, ""}
{xxx:, 2, "m$(N)", "asynMotor", motorSim1, 1, "motor $(N)", degrees, Pos, 1, .1, .2, 0, 1, .2, 0.01, 5, 100, -100, ""}
{xxx:, 3, "m$(N)", "asynMotor", motorSim1, 2, "motor $(N)", degrees, Pos, 1, .1, .2, 0, 1, .2, 0.01, 5, 100, -100, ""}
{xxx:, 4, "m$(N)", "asynMotor", motorSim1, 3, "motor $(N)", degrees, Pos, 1, .1, .2, 0, 1, .2, 0.01, 5, 100, -100, ""}
{xxx:, 5, "m$(N)", "asynMotor", motorSim1, 4, "motor $(N)", degrees, Pos, 1, .1, .2, 0, 1, .2, 0.01, 5, 100, -100, ""}
{xxx:, 6, "m$(N)", "asynMotor", motorSim1, 5, "motor $(N)", degrees, Pos, 1, .1, .2, 0, 1, .2, 0.01, 5, 100, -100, ""}
{xxx:, 7, "m$(N)", "asynMotor", motorSim1, 6, "motor $(N)", degrees, Pos, 1, .1, .2, 0, 1, .2, 0.01, 5, 100, -100, ""}
{xxx:, 8, "m$(N)", "asynMotor", motorSim1, 7, "motor $(N)", degrees, Pos, 1, .1, .2, 0, 1, .2, 0.01, 5, 100, -100, ""}
}
iocBoot/iocCygwin/orient_xtals.substitutions deleted 100644 → 0
+ 0
− 15
View file @ 32341853
file "$(OPTICS)/opticsApp/Db/orient_xtals.db"
{
pattern
{P, O, PREC, N, xtal, a, b, c, alpha, beta, gamma}
{xxx:, 1, 4, 1, Silicon, 5.431, 5.431, 5.431, 90, 90, 90}
{xxx:, 1, 4, 2, "Beryllium hcp", 2.2858, 2.2858, 3.5843, 90, 90, 120}
{xxx:, 1, 4, 3, VO2, 5.743, 4.517, 5.375, 90, 122.6, 90}
{xxx:, 1, 4, 4, undefined, 1, 1, 1, 90, 90, 90}
{xxx:, 1, 4, 5, undefined, 1, 1, 1, 90, 90, 90}
{xxx:, 1, 4, 6, undefined, 1, 1, 1, 90, 90, 90}
{xxx:, 1, 4, 7, undefined, 1, 1, 1, 90, 90, 90}
{xxx:, 1, 4, 8, undefined, 1, 1, 1, 90, 90, 90}
{xxx:, 1, 4, 9, undefined, 1, 1, 1, 90, 90, 90}
{xxx:, 1, 4, 10, undefined, 1, 1, 1, 90, 90, 90}
}
iocBoot/iocCygwin/pid_slow.substitutions deleted 100755 → 0
+ 0
− 9
View file @ 32341853
# This file demonstrates slow feedback. The initial INP and OUT assume the first channel
# of an IP330 ADC connected to the first channel of a DAC128V DAC.
file "$(STD)/stdApp/Db/pid_control.db"
{
pattern
{P, PID, INP, OUT, LOPR, HOPR, DRVL, DRVH, PREC, KP, KI, KD, SCAN}
{xxx:, pid_slow, xxx:IP330_1, xxx:DAC3_1, 0, 100, 0, 5, 3, 0.2, 3., 0., ".1 second"}
}
iocBoot/iocCygwin/pseudoMotor.substitutions deleted 100644 → 0
+ 0
− 22
View file @ 32341853
# This is a simple example using the sumDiff2D database. This takes 2 real motors and makes 2 soft motors,
# SUM which moves both motors together, and DIFF which moves them in opposite directions.
# It can be used for slits, for K/B mirror benders, etc.
file "$(MOTOR)/motorApp/Db/pseudoMotor.db"
{
pattern
{P, M, DINP, OUT, RDBL, STOO, DESC, EGU, DIR, VELO, VBAS, ACCL, BDST, BVEL, BACC, MRES, RRES, PREC, DHLM, DLLM}
{xxx:, pm1, "xxx:KBV:Done NPP NMS", "xxx:pm1DVAL.VAL PP MS", "xxx:KBV:Readback.G NPP NMS", "xxx:KBV:Stop PP MS", "Vert. curvature", mm, Pos, 1, .1, .1, 0, 1, .1, .1, 1.0, 3, 10000, -10000}
{xxx:, pm2, "xxx:KBV:Done NPP NMS", "xxx:pm2DVAL.VAL PP MS", "xxx:KBV:Readback.H NPP NMS", "xxx:KBV:Stop PP MS", "Vert. Ellipticity", mm, Pos, 1, .1, .1, 0, 1, .1, .1, 1.0, 3, 10000, -10000}
{xxx:, pm3, "xxx:KBH:Done NPP NMS", "xxx:pm3DVAL.VAL PP MS", "xxx:KBH:Readback.G NPP NMS", "xxx:KBH:Stop PP MS", "Hor. curvature", mm, Pos, 1, .1, .1, 0, 1, .1, .1, 1.0, 3, 10000, -10000}
{xxx:, pm4, "xxx:KBH:Done NPP NMS", "xxx:pm4DVAL.VAL PP MS", "xxx:KBH:Readback.H NPP NMS", "xxx:KBH:Stop PP MS", "Hor. ellipticity", mm, Pos, 1, .1, .1, 0, 1, .1, .1, 1.0, 3, 10000, -10000}
}
file "$(MOTOR)/motorApp/Db/sumDiff2D.db"
{
pattern
{P, T, SUM, DIFF, M1DRV, M1RBV, M2DRV, M2RBV, M1STOP, M1DONE, M2STOP, M2DONE, PREC}
{xxx:, KBV:, pm1, pm2, m1.VAL, m1.RBV, m2.VAL, m2.RBV, m1.STOP, m1.DMOV, m2.STOP, m2.DMOV, 1}
{xxx:, KBH:, pm3, pm4, m3.VAL, m3.RBV, m4.VAL, m4.RBV, m3.STOP, m3.DMOV, m4.STOP, m4.DMOV, 1}
}
iocBoot/iocCygwin/run deleted 100755 → 0
+ 0
− 1
View file @ 32341853
../../bin/cygwin-x86/xxx.exe st.cmd
iocBoot/iocCygwin/saveData.req deleted 100644 → 0
+ 0
− 45
View file @ 32341853
[prefix]
$(P)
[status]
$(P)saveData_status
[message]
$(P)saveData_message
[filename]
$(P)saveData_fileName
[counter] # scan counter
$(P)saveData_scanNumber
[fileSystem] # scan file system
$(P)saveData_fileSystem
[subdir] # scan file subdirectory
$(P)saveData_subDir
[basename] # scan file base name
$(P)saveData_baseName
[fullPathName]
$(P)saveData_fullPathName
[realTime1D] # if nonzero, write 1D data as it comes in
$(P)saveData_realTime1D
[scanRecord] # specify scan records to be monitored
$(P)scanH
$(P)scan1
$(P)scan2
$(P)scan3
$(P)scan4
[extraPV]
$(P)userCalc1.CALC "string"
$(P)saveData_realTime1D "enum"
$(P)saveData_scanNumber "long"
$(P)saveData_comment1
$(P)saveData_comment2
$(P)saveData_fileSystem "filesystem"
iocBoot/iocCygwin/save_restore.cmd deleted 100644 → 0
+ 0
− 69
View file @ 32341853
# BEGIN save_restore.cmd ------------------------------------------------------
### save_restore setup
#
# This file does not require modification for standard use, but...
# status PVs
#save_restoreSet_UseStatusPVs(1)
save_restoreSet_status_prefix("xxx:")
dbLoadRecords("$(AUTOSAVE)/asApp/Db/save_restoreStatus.db", "P=xxx:, DEAD_SECONDS=5")
# Ok to save/restore save sets with missing values (no CA connection to PV)?
save_restoreSet_IncompleteSetsOk(1)
# Save dated backup files?
save_restoreSet_DatedBackupFiles(1)
# Number of sequenced backup files to write
save_restoreSet_NumSeqFiles(3)
# Time interval between sequenced backups
save_restoreSet_SeqPeriodInSeconds(300)
# specify where save files should be
set_savefile_path("$(TOP)/iocBoot/$(IOC)", "autosave")
###
# specify what save files should be restored. Note these files must be
# in the directory specified in set_savefile_path(), or, if that function
# has not been called, from the directory current when iocInit is invoked
set_pass0_restoreFile("auto_positions.sav")
set_pass0_restoreFile("auto_settings.sav")
set_pass1_restoreFile("auto_settings.sav")
# Note that you can restore a .sav file without also autosaving to it.
#set_pass0_restoreFile("myInitData.sav")
#set_pass1_restoreFile("myInitData.sav")
###
# specify directories in which to to search for included request files
set_requestfile_path("$(STARTUP)", "")
set_requestfile_path("$(STARTUP)", "autosave")
set_requestfile_path("$(AREA_DETECTOR)", "ADApp/Db")
set_requestfile_path("$(AUTOSAVE)", "asApp/Db")
set_requestfile_path("$(CALC)", "calcApp/Db")
#set_requestfile_path("$(CAMAC)", "camacApp/Db")
set_requestfile_path("$(DAC128V)", "dac128VApp/Db")
set_requestfile_path("$(DELAYGEN)", "delaygenApp/Db")
set_requestfile_path("$(DXP)", "dxpApp/Db")
set_requestfile_path("$(IP)", "ipApp/Db")
set_requestfile_path("$(IP330)", "ip330App/Db")
set_requestfile_path("$(IPUNIDIG)", "ipUnidigApp/Db")
#set_requestfile_path("$(LOVE)", "loveApp/Db")
set_requestfile_path("$(MCA)", "mcaApp/Db")
#set_requestfile_path("$(MODBUS)", "modbusApp/Db")
set_requestfile_path("$(MOTOR)", "motorApp/Db")
set_requestfile_path("$(OPTICS)", "opticsApp/Db")
set_requestfile_path("$(QUADEM)", "quadEMApp/Db")
set_requestfile_path("$(SSCAN)", "sscanApp/Db")
set_requestfile_path("$(STD)", "stdApp/Db")
#set_requestfile_path("$(VAC)", "vacApp/Db")
set_requestfile_path("$(VME)", "vmeApp/Db")
set_requestfile_path("$(TOP)", "xxxApp/Db")
# Debug-output level
save_restoreSet_Debug(0)
# END save_restore.cmd --------------------------------------------------------
iocBoot/iocCygwin/scanParms.substitutions deleted 100644 → 0
+ 0
− 48
View file @ 32341853
# Note beginning with 3.13.9, macro args that contain macro args must be
# in quotes"
file "$(SSCAN)/sscanApp/Db/scanParms.db"
{
{P=xxx:,SCANREC=xxx:scan1,Q=m1,POS="$(Q).VAL",RDBK="$(Q).RBV"}
{P=xxx:,SCANREC=xxx:scan1,Q=m2,POS="$(Q).VAL",RDBK="$(Q).RBV"}
{P=xxx:,SCANREC=xxx:scan1,Q=m3,POS="$(Q).VAL",RDBK="$(Q).RBV"}
{P=xxx:,SCANREC=xxx:scan1,Q=m4,POS="$(Q).VAL",RDBK="$(Q).RBV"}
{P=xxx:,SCANREC=xxx:scan1,Q=m5,POS="$(Q).VAL",RDBK="$(Q).RBV"}
{P=xxx:,SCANREC=xxx:scan1,Q=m6,POS="$(Q).VAL",RDBK="$(Q).RBV"}
{P=xxx:,SCANREC=xxx:scan1,Q=m7,POS="$(Q).VAL",RDBK="$(Q).RBV"}
{P=xxx:,SCANREC=xxx:scan1,Q=m8,POS="$(Q).VAL",RDBK="$(Q).RBV"}
{P=xxx:,SCANREC=xxx:scan1,Q=Table1X,POS=table1.X,RDBK=table1.XRB}
{P=xxx:,SCANREC=xxx:scan1,Q=Table1Y,POS=table1.Y,RDBK=table1.YRB}
{P=xxx:,SCANREC=xxx:scan1,Q=Table1Z,POS=table1.Z,RDBK=table1.ZRB}
{P=xxx:,SCANREC=xxx:scan1,Q=Table1AX,POS=table1.AX,RDBK=table1.AXRB}
{P=xxx:,SCANREC=xxx:scan1,Q=Table1AY,POS=table1.AY,RDBK=table1.AYRB}
{P=xxx:,SCANREC=xxx:scan1,Q=Table1AZ,POS=table1.AZ,RDBK=table1.AZRB}
#{P=xxx:,SCANREC=xxx:scan1,Q=BraggE,POS=BraggEAO.VAL,RDBK=BraggERdbkAO.VAL}
#{P=xxx:,SCANREC=xxx:scan1,Q=BraggLambda,POS=BraggLambdaAO.VAL,RDBK=BraggLambdaRdbkAO.VAL}
#{P=xxx:,SCANREC=xxx:scan1,Q=BraggTheta,POS=BraggThetaAO.VAL,RDBK=BraggThetaRdbkAO.VAL}
#{P=xxx:,SCANREC=xxx:scan1,Q=HR1_E,POS=HR1_EAO.VAL,RDBK=HR1_ERdbkAO}
#{P=xxx:,SCANREC=xxx:scan1,Q=HR1_A,POS=HR1_worldOffAO.VAL,RDBK=HR1_worldOffAO.VAL}
# old slit
{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Hp,POS=Slit1Hxp.VAL,RDBK=Slit1Ht2.A}
{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Hn,POS=Slit1Hxn.VAL,RDBK=Slit1Ht2.B}
{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Hsize,POS=Slit1Hsize.VAL,RDBK=Slit1Ht2.C}
{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Hcenter,POS=Slit1Hcenter.VAL,RDBK=Slit1Ht2.D}
{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Vp,POS=Slit1Vxp.VAL,RDBK=Slit1Vt2.A}
{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Vn,POS=Slit1Vxn.VAL,RDBK=Slit1Vt2.B}
{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Vsize,POS=Slit1Vsize.VAL,RDBK=Slit1Vt2.C}
{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Vcenter,POS=Slit1Vcenter.VAL,RDBK=Slit1Vt2.D}
# new soft-motor-based slit
#{P=xxx:,SCANREC=xxx:scan1,Q=Slit2Hxn,POS="$(Q).VAL",RDBK="$(Q).RBV"}
#{P=xxx:,SCANREC=xxx:scan1,Q=Slit2Hxp,POS="$(Q).VAL",RDBK="$(Q).RBV"}
#{P=xxx:,SCANREC=xxx:scan1,Q=Slit2Hsize,POS="$(Q).VAL",RDBK="$(Q).RBV"}
#{P=xxx:,SCANREC=xxx:scan1,Q=Slit2Hcenter,POS="$(Q).VAL",RDBK="$(Q).RBV"}
#{P=xxx:,SCANREC=xxx:scan1,Q=Slit2Vxn,POS="$(Q).VAL",RDBK="$(Q).RBV"}
#{P=xxx:,SCANREC=xxx:scan1,Q=Slit2Vxp,POS="$(Q).VAL",RDBK="$(Q).RBV"}
#{P=xxx:,SCANREC=xxx:scan1,Q=Slit2Vsize,POS="$(Q).VAL",RDBK="$(Q).RBV"}
#{P=xxx:,SCANREC=xxx:scan1,Q=Slit2Vcenter,POS="$(Q).VAL",RDBK="$(Q).RBV"}
}
iocBoot/iocCygwin/serial.cmd deleted 100644 → 0
+ 0
− 147
View file @ 32341853
# BEGIN serial.cmd ------------------------------------------------------------
# Set up 2 local serial ports
# serial 1 connected to Keithley2K DMM at 19200 baud
#drvAsynSerialPortConfigure("portName","ttyName",priority,noAutoConnect,
# noProcessEos)
drvAsynSerialPortConfigure("serial1", "/dev/ttyS0", 0, 0, 0)
asynSetOption(serial1,0,baud,19200)
asynSetOption(serial1,0,parity,none)
#asynOctetSetInputEos(const char *portName, int addr,
# const char *eosin,const char *drvInfo)
asynOctetSetInputEos("serial1",0,"\r\n")
# asynOctetSetOutputEos(const char *portName, int addr,
# const char *eosin,const char *drvInfo)
asynOctetSetOutputEos("serial1",0,"\r")
# Make port available from the iocsh command line
#asynOctetConnect(const char *entry, const char *port, int addr,
# int timeout, int buffer_len, const char *drvInfo)
asynOctetConnect("serial1", "serial1")
# serial 2 connected to Newport MM4000 at 38400 baud
drvAsynSerialPortConfigure("serial2", "/dev/ttyS1", 0, 0, 0)
asynSetOption(serial2,0,baud,38400)
asynSetOption(serial2,0,parity,none)
asynOctetConnect("serial2", "serial2")
asynOctetSetInputEos("serial2",0,"\r")
asynOctetSetOutputEos("serial2",0,"\r")
# Set up ports 1 and 2 on Moxa box
# serial 3 is connected to the ACS MCB-4B at 9600 baud
#drvAsynIPPortConfigure("portName","hostInfo",priority,noAutoConnect,
# noProcessEos)
drvAsynIPPortConfigure("serial3", "164.54.160.50:4001", 0, 0, 0)
asynOctetConnect("serial3", "serial3")
asynOctetSetInputEos("serial3",0,"\r")
# For Digitel need to use null input terminator
#asynOctetSetInputEos("serial3",0,"")
asynOctetSetOutputEos("serial3",0,"\r")
# serial 4 not connected for now
drvAsynIPPortConfigure("serial4", "164.54.160.50:4002", 0, 0, 0)
asynOctetConnect("serial4", "serial4")
asynOctetSetInputEos("serial4",0,"\r")
asynOctetSetOutputEos("serial4",0,"\r")
# Newport MM4000 driver setup parameters:
# (1) maximum # of controllers,
# (2) motor task polling rate (min=1Hz, max=60Hz)
MM4000Setup(1, 10)
# Newport MM4000 driver configuration parameters:
# (1) controller
# (2) asyn port name (e.g. serial1 or gpib1)
# (3) GPIB address (0 for serial)
MM4000Config(0, "serial2", 0)
# Newport PM500 driver setup parameters:
# (1) maximum number of controllers in system
# (2) motor task polling rate (min=1Hz,max=60Hz)
#PM500Setup(1, 10)
# Newport PM500 configuration parameters:
# (1) controller
# (2) asyn port name (e.g. serial1 or gpib1)
#PM500Config(0, "serial3")
# McClennan PM304 driver setup parameters:
# (1) maximum number of controllers in system
# (2) motor task polling rate (min=1Hz, max=60Hz)
#PM304Setup(1, 10)
# McClennan PM304 driver configuration parameters:
# (1) controller being configured
# (2) MPF serial server name (string)
# (3) Number of axes on this controller
#PM304Config(0, "serial4", 1)
# ACS MCB-4B driver setup parameters:
# (1) maximum number of controllers in system
# (2) motor task polling rate (min=1Hz, max=60Hz)
MCB4BSetup(1, 10)
# ACS MCB-4B driver configuration parameters:
# (1) controller being configured
# (2) asyn port name (string)
MCB4BConfig(0, "serial3")
# Load asynRecord records on all ports
dbLoadTemplate("asynRecord.substitutions")
# send impromptu message to serial device, parse reply
# (was serial_OI_block)
dbLoadRecords("$(IP)/ipApp/Db/deviceCmdReply.db","P=xxx:,N=1,PORT=serial1,ADDR=0,OMAX=100,IMAX=100")
dbLoadRecords("$(IP)/ipApp/Db/deviceCmdReply.db","P=xxx:,N=2,PORT=serial2,ADDR=0,OMAX=100,IMAX=100")
dbLoadRecords("$(IP)/ipApp/Db/deviceCmdReply.db","P=xxx:,N=3,PORT=serial3,ADDR=0,OMAX=100,IMAX=100")
# Stanford Research Systems SR570 Current Preamplifier
#dbLoadRecords("$(IP)/ipApp/Db/SR570.db", "P=xxx:,A=A1,PORT=serial1")
# Lakeshore DRC-93CA Temperature Controller
#dbLoadRecords("$(IP)/ipApp/Db/LakeShoreDRC-93CA.db", "P=xxx:,Q=TC1,PORT=serial4")
# Huber DMC9200 DC Motor Controller
#dbLoadRecords("$(IP)/ipApp/Db/HuberDMC9200.db", "P=xxx:,Q=DMC1:,PORT=serial5")
# Oriel 18011 Encoder Mike
#dbLoadRecords("$(IP)/ipApp/Db/eMike.db", "P=xxx:,M=em1,PORT=serial3")
# Keithley 2000 DMM
dbLoadRecords("$(IP)/ipApp/Db/Keithley2kDMM_mf.db","P=xxx:,Dmm=D1,PORT=serial1")
# Oxford Cyberstar X1000 Scintillation detector and pulse processing unit
#dbLoadRecords("$(IP)/ipApp/Db/Oxford_X1k.db","P=xxx:,S=s1,PORT=serial4")
# Oxford ILM202 Cryogen Level Meter (Serial)
#dbLoadRecords("$(IP)/ipApp/Db/Oxford_ILM202.db","P=xxx:,S=s1,PORT=serial5")
# Elcomat autocollimator
#dbLoadRecords("$(IP)/ipApp/Db/Elcomat.db", "P=xxx:,PORT=serial8")
# Eurotherm temp controller
#dbLoadRecords("$(IP)/ipApp/Db/Eurotherm.db","P=xxx:,PORT=serial7")
# MKS vacuum gauges
#dbLoadRecords("$(IP)/ipApp/Db/MKS.db","P=xxx:,PORT=serial2,CC1=cc1,CC2=cc3,PR1=pr1,PR2=pr3")
# PI Digitel 500/1500 pump
#dbLoadRecords("$(IP)/ipApp/Db/Digitel.db","xxx:,PUMP=ip1,PORT=serial3")
# PI MPC ion pump
#dbLoadRecords("$(IP)/ipApp/Db/MPC.db","P=xxx:,PUMP=ip2,PORT=serial4,PA=0,PN=1")
# PI MPC TSP (titanium sublimation pump)
#dbLoadRecords("$(IP)/ipApp/Db/TSP.db","P=xxx:,TSP=tsp1,PORT=serial4,PA=0")
# Heidenhain ND261 encoder (for PSL monochromator)
#dbLoadRecords("$(IP)/ipApp/Db/heidND261.db", "P=xxx:,PORT=serial1")
# Love Controllers
#devLoveDebug=1
#loveServerDebug=1
#dbLoadRecords("$(IP)/ipApp/Db/love.db", "P=xxx:,Q=Love_0,C=0,PORT=PORT2,ADDR=1")
# END serial.cmd --------------------------------------------------------------
iocBoot/iocCygwin/softMotor.substitutions deleted 100644 → 0
+ 0
− 15
View file @ 32341853
file "$(STD)/stdApp/Db/softMotor.db"
{
pattern
{P, SM}
{xxx:, SM1}
{xxx:, SM2}
{xxx:, SM3}
{xxx:, SM4}
{xxx:, SM5}
{xxx:, SM6}
{xxx:, SM7}
{xxx:, SM8}
{xxx:, SM9}
{xxx:, SM10}
}
iocBoot/iocLinux/Makefile deleted 100644 → 0
+ 0
− 5
View file @ 32341853
TOP = ../..
include $(TOP)/configure/CONFIG
ARCH = linux-x86_64
TARGETS = envPaths
include $(TOP)/configure/RULES.ioc
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment