use autosaveBuild

iocBoot/iocLinux/auto_settings.req

-file motor_settings.req P=$(P),M=m1
-file motor_settings.req P=$(P),M=m2
-file motor_settings.req P=$(P),M=m3
-file motor_settings.req P=$(P),M=m4
-file motor_settings.req P=$(P),M=m5
-file motor_settings.req P=$(P),M=m6
-file motor_settings.req P=$(P),M=m7
-file motor_settings.req P=$(P),M=m8
 
-#file pseudoMotor_settings.req P=$(P),M=pm1
-#file pseudoMotor_settings.req P=$(P),M=pm2
-#file pseudoMotor_settings.req P=$(P),M=pm3
-#file pseudoMotor_settings.req P=$(P),M=pm4
-
-file scanParms_settings.req P=$(P),M=m1
-file scanParms_settings.req P=$(P),M=m2
-file scanParms_settings.req P=$(P),M=m3
-file scanParms_settings.req P=$(P),M=m4
-file scanParms_settings.req P=$(P),M=m5
-file scanParms_settings.req P=$(P),M=m6
-file scanParms_settings.req P=$(P),M=m7
-file scanParms_settings.req P=$(P),M=m8
-
-#file table_settings.req P=$(P),T=table1,Q=table1
-
-file standardScans_settings.req P=$(P)
-file saveData_settings.req P=$(P)
-
-# Kohzu monochromator
-#file kohzuSeq_settings.req P=$(P)
-
-# High resolution monochromator
-#file hrSeq_settings.req P=$(P),N=1
-
-# Io calc
-#file Io_settings.req P=xxx:Io:
-
-### user calcs.  Disabled on startup unless the xxxEnable PV is
-### autosaved.
-file userCalcs10_settings.req P=$(P)
-$(P)userCalcEnable
-
-file userCalcOuts10_settings.req P=$(P)
-$(P)userCalcOutEnable.VAL
-
-file userTransforms10_settings.req P=$(P)
-$(P)userTranEnable
-
-file userStringCalcs10_settings.req P=$(P)
-$(P)userStringCalcEnable
-
-file userStringSeqs10_settings.req P=$(P)
-$(P)userStringSeqEnable
-
-file userArrayCalcs10_settings.req P=$(P)
-$(P)userArrayCalcEnable
-
-# 4-step measurement
-file auto_4step_settings.req P=$(P),Q=4step
-
-file userAve10_settings.req P=$(P)
-
-# orientation matrix
-#file orient_settings.req P=$(P),O=1
-#file orient_xtals_settings.req P=$(P),O=1
-
-## Femto amplifier 4
-#file femto.req P=$(P),H=fem01:,F=seq01:
-
-### PID_based feedback
-file pid_control_settings.req P=$(P) PID=pid_slow
-file async_pid_control_settings.req P=$(P) PID=async_pid_slow
-#file fb_epid.req P=$(P)epid1
-
-file beamEnergy_settings.req P=$(P)
-file SGM_settings.req P=$(P),SGM=SGM1
-
-#file filterDrive.req "P=xxx:,R=filter:"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=1"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=2"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=3"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=4"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=5"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=6"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=7"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=8"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=9"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=10"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=11"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=12"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=13"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=14"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=15"
-#file filterBladeNoSensor.req "P=xxx:,R=filter:,N=16"
-
-file EnsemblePSOFly_settings.req "P=xxx:,Q=PSOFly:"
+file built_settings.req P=$(P)