eliminated platform specific folders, instead moved scripts to examples folder

iocBoot/iocxxx/softioc/canberra_1.cmd

-
-# BEGIN canberra_1.cmd --------------------------------------------------------
-
-# Commands to load a single Canberra detector with ICB electronics
-#epicsEnvSet("mcaRecordDebug", 1)
-#epicsEnvSet("aimDebug", 1)
-#epicsEnvSet("icbDebug", 1)
-
-# AIMConfig(portName, ethernet_address, portNumber, maxChans,
-#           maxSignals, maxSequences, ethernetDevice)
-#    portName,         # asyn port name to be created
-#    ethernet_address, # Low order 16 bits of Ethernet hardware address
-#    portNumber,       # ADC port on AIM (1 or 2)
-#    maxChans,         # Maximum channels for this input
-#    maxSignals,       # Maximum signals for this input (>1 for MCS or multiplexor)
-#    maxSequences,     # Maximum sequences for time resolved applications
-#    ethernetDevice)   # Ethernet device name on IOC
-#                      # Typically ei0 for Motorola 68K, dc0 for ppc, eth0 for Linux
-AIMConfig("AIM1/1", 0x59e, 1, 2048, 1, 1, "eth0")
-AIMConfig("AIM1/2", 0x59e, 2, 2048, 8, 1, "eth0")
-AIMConfig("DSA2000", 0x8058, 1, 2048, 1, 1, "eth0")
-dbLoadRecords("$(MCA)/mcaApp/Db/mca.db", "P=$(PREFIX),M=aim_adc1,DTYP=asynMCA,INP=@asyn(AIM1/1 0),NCHAN=2048")
-dbLoadRecords("$(MCA)/mcaApp/Db/mca.db", "P=$(PREFIX),M=aim_adc2,DTYP=asynMCA,INP=@asyn(AIM1/2 0),NCHAN=2048")
-dbLoadRecords("$(MCA)/mcaApp/Db/mca.db", "P=$(PREFIX),M=aim_adc3,DTYP=asynMCA,INP=@asyn(AIM1/2 2),NCHAN=2048")
-dbLoadRecords("$(MCA)/mcaApp/Db/mca.db", "P=$(PREFIX),M=aim_adc4,DTYP=asynMCA,INP=@asyn(AIM1/2 4),NCHAN=2048")
-dbLoadRecords("$(MCA)/mcaApp/Db/mca.db", "P=$(PREFIX),M=aim_adc5,DTYP=asynMCA,INP=@asyn(AIM1/2 6),NCHAN=2048")
-dbLoadRecords("$(MCA)/mcaApp/Db/mca.db", "P=$(PREFIX),M=aim_adc6,DTYP=asynMCA,INP=@asyn(DSA2000 0),NCHAN=2048")
-
-# icbConfig(portName, ethernetAddress, icbAddress, moduleType)
-#    portName to give to this asyn port
-#    ethernetAddress - Ethernet address of module, low order 16 bits
-#    icbAddress - rotary switch setting inside ICB module
-#    moduleType
-#       0 = ADC
-#       1 = Amplifier
-#       2 = HVPS
-#       3 = TCA
-#       4 = DSP
-icbConfig("icbAdc1", 0x59e, 5, 0)
-dbLoadRecords("$(MCA)/mcaApp/Db/icb_adc.db", "P=$(PREFIX),ADC=adc1,PORT=icbAdc1")
-icbConfig("icbAmp1", 0x59e, 3, 1)
-dbLoadRecords("$(MCA)/mcaApp/Db/icb_amp.db", "P=$(PREFIX),AMP=amp1,PORT=icbAmp1")
-icbConfig("icbHvps1", 0x59e, 2, 2)
-dbLoadRecords("$(MCA)/mcaApp/Db/icb_hvps.db", "P=$(PREFIX),HVPS=hvps1,PORT=icbHvps1,LIMIT=1000")
-icbConfig("icbTca1", 0x59e, 8, 3)
-dbLoadRecords("$(MCA)/mcaApp/Db/icb_tca.db", "P=$(PREFIX),TCA=tca1,MCA=aim_adc2,PORT=icbTca1")
-#icbConfig("icbDsp1", 0x8058, 0, 4)
-#dbLoadRecords("$(MCA)/mcaApp/Db/icbDsp.db", "P=$(PREFIX),DSP=dsp1,PORT=icbDsp1")
-
-# END canberra_1.cmd ----------------------------------------------------------

iocBoot/iocxxx/softioc/scanParms.substitutions

-file "$(SSCAN)/sscanApp/Db/scanParms.db"
-{
-{P=xxx:,SCANREC=xxx:scan1,Q=m1,POS="$(Q).VAL",RDBK="$(Q).RBV"}
-{P=xxx:,SCANREC=xxx:scan1,Q=m2,POS="$(Q).VAL",RDBK="$(Q).RBV"}
-{P=xxx:,SCANREC=xxx:scan1,Q=m3,POS="$(Q).VAL",RDBK="$(Q).RBV"}
-{P=xxx:,SCANREC=xxx:scan1,Q=m4,POS="$(Q).VAL",RDBK="$(Q).RBV"}
-{P=xxx:,SCANREC=xxx:scan1,Q=m5,POS="$(Q).VAL",RDBK="$(Q).RBV"}
-{P=xxx:,SCANREC=xxx:scan1,Q=m6,POS="$(Q).VAL",RDBK="$(Q).RBV"}
-{P=xxx:,SCANREC=xxx:scan1,Q=m7,POS="$(Q).VAL",RDBK="$(Q).RBV"}
-{P=xxx:,SCANREC=xxx:scan1,Q=m8,POS="$(Q).VAL",RDBK="$(Q).RBV"}
-
-#{P=xxx:,SCANREC=xxx:scan1,Q=Table1X,POS=table1.X,RDBK=table1.XRB}
-#{P=xxx:,SCANREC=xxx:scan1,Q=Table1Y,POS=table1.Y,RDBK=table1.YRB}
-#{P=xxx:,SCANREC=xxx:scan1,Q=Table1Z,POS=table1.Z,RDBK=table1.ZRB}
-#{P=xxx:,SCANREC=xxx:scan1,Q=Table1AX,POS=table1.AX,RDBK=table1.AXRB}
-#{P=xxx:,SCANREC=xxx:scan1,Q=Table1AY,POS=table1.AY,RDBK=table1.AYRB}
-#{P=xxx:,SCANREC=xxx:scan1,Q=Table1AZ,POS=table1.AZ,RDBK=table1.AZRB}
-
-#{P=xxx:,SCANREC=xxx:scan1,Q=BraggE,POS=BraggEAO.VAL,RDBK=BraggERdbkAO.VAL}
-#{P=xxx:,SCANREC=xxx:scan1,Q=BraggLambda,POS=BraggLambdaAO.VAL,RDBK=BraggLambdaRdbkAO.VAL}
-#{P=xxx:,SCANREC=xxx:scan1,Q=BraggTheta,POS=BraggThetaAO.VAL,RDBK=BraggThetaRdbkAO.VAL}
-
-#{P=xxx:,SCANREC=xxx:scan1,Q=HR1_E,POS=HR1_EAO.VAL,RDBK=HR1_ERdbkAO}
-#{P=xxx:,SCANREC=xxx:scan1,Q=HR1_A,POS=HR1_worldOffAO.VAL,RDBK=HR1_worldOffAO.VAL}
-
-# slit
-#{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Hp,POS=Slit1Hxp.VAL,RDBK=Slit1Ht2.A}
-#{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Hn,POS=Slit1Hxn.VAL,RDBK=Slit1Ht2.B}
-#{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Hsize,POS=Slit1Hsize.VAL,RDBK=Slit1Ht2.C}
-#{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Hcenter,POS=Slit1Hcenter.VAL,RDBK=Slit1Ht2.D}
-#{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Vp,POS=Slit1Vxp.VAL,RDBK=Slit1Vt2.A}
-#{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Vn,POS=Slit1Vxn.VAL,RDBK=Slit1Vt2.B}
-#{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Vsize,POS=Slit1Vsize.VAL,RDBK=Slit1Vt2.C}
-#{P=xxx:,SCANREC=xxx:scan1,Q=Slit1Vcenter,POS=Slit1Vcenter.VAL,RDBK=Slit1Vt2.D}
-
-
-}

iocBoot/iocxxx/vxWorks/areaDetector.cmd

-# Create a simDetector driver
-simDetectorConfig("SIM1", 640, 480, 1, 50, 50000000)
-dbLoadRecords("$(ADCORE)/ADApp/Db/ADBase.template",     "P=$(PREFIX),R=cam1:,PORT=SIM1,ADDR=0,TIMEOUT=1")
-dbLoadRecords("$(ADCORE)/ADApp/Db/simDetector.template","P=$(PREFIX),R=cam1:,PORT=SIM1,ADDR=0,TIMEOUT=1")
-
-# Create a second simDetector driver
-simDetectorConfig("SIM2", 300, 200, 1, 50, 50000000)
-dbLoadRecords("$(ADCORE)/ADApp/Db/ADBase.template",     "P=$(PREFIX),R=cam2:,PORT=SIM2,ADDR=0,TIMEOUT=1")
-dbLoadRecords("$(ADCORE)/ADApp/Db/simDetector.template","P=$(PREFIX),R=cam2:,PORT=SIM2,ADDR=0,TIMEOUT=1")
-
-# Create a standard arrays plugin, set it to get data from first simDetector driver.
-NDStdArraysConfigure("SIM1Image", 3, 0, "SIM1", 0, 2000000)
-epicsEnvSet("cmd","P=$(PREFIX),R=image1:,PORT=SIM1Image,ADDR=0,TIMEOUT=1,NDARRAY_PORT=SIM1,NDARRAY_ADDR=0")
-dbLoadRecords("$(ADCORE)/ADApp/Db/NDPluginBase.template","$(cmd)")
-epicsEnvSet("cmd","P=$(PREFIX),R=image1:,PORT=SIM1Image,ADDR=0,TIMEOUT=1,TYPE=Int8,FTVL=UCHAR,NELEMENTS=1392640")
-dbLoadRecords("$(ADCORE)/ADApp/Db/NDStdArrays.template", "$(cmd)")
-
-# Create a standard arrays plugin, set it to get data from second simDetector driver.
-NDStdArraysConfigure("SIM2Image", 1, 0, "SIM2", 0, 2000000)
-epicsEnvSet("cmd","P=$(PREFIX),R=image2:,PORT=SIM2Image,ADDR=0,TIMEOUT=1,NDARRAY_PORT=SIM1,NDARRAY_ADDR=0")
-dbLoadRecords("$(ADCORE)/ADApp/Db/NDPluginBase.template", "$(cmd)")
-epicsEnvSet("cmd","P=$(PREFIX),R=image2:,PORT=SIM2Image,ADDR=0,TIMEOUT=1,TYPE=Int8,FTVL=UCHAR,NELEMENTS=1392640")
-dbLoadRecords("$(ADCORE)/ADApp/Db/NDStdArrays.template", "$(cmd)")
-# Load the database to use with Stephen Mudie's IDL code
-#dbLoadRecords("$(ADCORE)/ADApp/Db/EPICS_AD_Viewer.template", "P=$(PREFIX), R=image1:")
-
-# Create a file saving plugin
-NDFileNetCDFConfigure("SIM1File", 20, 0, "SIM1", 0)
-epicsEnvSet("cmd","P=$(PREFIX),R=netCDF1:,PORT=SIM1File,ADDR=0,TIMEOUT=1,NDARRAY_PORT=SIM1,NDARRAY_ADDR=0")
-dbLoadRecords("$(ADCORE)/ADApp/Db/NDPluginBase.template", "$(cmd)")
-dbLoadRecords("$(ADCORE)/ADApp/Db/NDFile.template",      "P=$(PREFIX),R=netCDF1:,PORT=SIM1File,ADDR=0,TIMEOUT=1")
-
-# Create an ROI plugin
-NDROIConfigure("SIM1ROI", 20, 0, "SIM1", 0, 8, 20, 20000000)
-epicsEnvSet("cmd","P=$(PREFIX),R=ROI1:,  PORT=SIM1ROI,ADDR=0,TIMEOUT=1,NDARRAY_PORT=SIM1,NDARRAY_ADDR=0")
-dbLoadRecords("$(ADCORE)/ADApp/Db/NDPluginBase.template", "$(cmd)")
-dbLoadRecords("$(ADCORE)/ADApp/Db/NDROI.template",  "P=$(PREFIX),R=ROI1:,  PORT=SIM1ROI,ADDR=0,TIMEOUT=1")
-dbLoadRecords("$(ADCORE)/ADApp/Db/NDROIN.template", "P=$(PREFIX),R=ROI1:0:,PORT=SIM1ROI,ADDR=0,TIMEOUT=1,HIST_SIZE=256")
-dbLoadRecords("$(ADCORE)/ADApp/Db/NDROIN.template", "P=$(PREFIX),R=ROI1:1:,PORT=SIM1ROI,ADDR=1,TIMEOUT=1,HIST_SIZE=256")
-dbLoadRecords("$(ADCORE)/ADApp/Db/NDROIN.template", "P=$(PREFIX),R=ROI1:2:,PORT=SIM1ROI,ADDR=2,TIMEOUT=1,HIST_SIZE=256")
-dbLoadRecords("$(ADCORE)/ADApp/Db/NDROIN.template", "P=$(PREFIX),R=ROI1:3:,PORT=SIM1ROI,ADDR=3,TIMEOUT=1,HIST_SIZE=256")