Newer
Older
# BEGIN serial.cmd ------------------------------------------------------------
# Initialize Octal UART stuff
# tyGSOctalDrv(int maxModules)
tyGSOctalDrv(1)
# tyGSOctalModuleInit(char *name, char *type, int intVec, int carrier, int slot)
# name - name by which you want to refer to this IndustryPack module
# type - one of "232", "422", "485" -- the serial hardware standard the module implements
# intVec - interrupt vector
# carrier - number of IP carrier (Carriers are numbered in the order in which they were
# defined in ipacAddXYZ() calls.)
# slot - location of module on carrier -- 0..3 for slot A..slot D
tyGSOctalModuleInit("UART_0", "232", 0x80, 0, 0)
# int tyGSAsynInit(char *port, char *moduleName, int channel, int baud,
# char parity, int sbits, int dbits, char handshake,
# char *inputEos, char *outputEos)
tyGSAsynInit("serial1", "UART_0", 0, 9600,'N',2,8,'N',"\r","\r") /* SRS570 */
tyGSAsynInit("serial2", "UART_0", 1, 9600,'E',1,7,'N',"\r\n","\r\n") /* */
tyGSAsynInit("serial3", "UART_0", 2, 9600,'E',1,7,'N',"","\n") /* Digitel */
tyGSAsynInit("serial4", "UART_0", 3, 9600,'N',1,8,'N',"\n","\n") /* MPC */
tyGSAsynInit("serial5", "UART_0", 4,19200,'N',1,8,'N',"\r","\r") /* ACS MCB-4B */
tyGSAsynInit("serial6", "UART_0", 5, 9600,'N',1,8,'N',"\r\n","\r") /* XIA slit */
tyGSAsynInit("serial7", "UART_0", 6,38400,'N',1,8,'N',"\r","\r") /* Newport MM4000 */
tyGSAsynInit("serial8", "UART_0", 7,19200,'N',1,8,'N',"","") /* Love controllers */
# Newport MM4000 driver setup parameters:
# (1) maximum # of controllers,
# (2) motor task polling rate (min=1Hz, max=60Hz)
# Newport MM4000 driver configuration parameters:
# (1) controller
# (2) asyn port name (e.g. serial1 or gpib1)
# (3) GPIB address (0 for serial)
# Newport PM500 driver setup parameters:
# (1) maximum number of controllers in system
# (2) motor task polling rate (min=1Hz,max=60Hz)
#PM500Setup(1, 10)
# Newport PM500 configuration parameters:
# (1) controller
# (2) asyn port name (e.g. serial1 or gpib1)
#PM500Config(0, "serial3")
# McClennan PM304 driver setup parameters:
# (1) maximum number of controllers in system
# (2) motor task polling rate (min=1Hz, max=60Hz)
#PM304Setup(1, 10)
# McClennan PM304 driver configuration parameters:
# (1) controller being configured
# (2) MPF serial server name (string)
# (3) Number of axes on this controller
#PM304Config(0, "serial4", 1)
# ACS MCB-4B driver setup parameters:
# (1) maximum number of controllers in system
# (2) motor task polling rate (min=1Hz, max=60Hz)
#MCB4BSetup(1, 10)
# ACS MCB-4B driver configuration parameters:
# (1) controller being configured
# (2) asyn port name (string)
#MCB4BConfig(0, "serial5")
# Load asynRecord records on all ports
dbLoadTemplate("asynRecord.substitutions")
# send impromptu message to serial device, parse reply
# (was serial_OI_block)
dbLoadRecords("$(IP)/ipApp/Db/deviceCmdReply.db","P=xxx:,N=1,PORT=serial1,ADDR=0,OMAX=100,IMAX=100")
# Stanford Research Systems SR570 Current Preamplifier
#dbLoadRecords("$(IP)/ipApp/Db/SR570.db", "P=xxx:,A=A1,PORT=serial1")
# Keithley 2000 DMM
#dbLoadRecords("$(IP)/ipApp/Db/Keithley2kDMM_mf.db","P=xxx:,Dmm=D1,PORT=serial1")
# channels: 10, 20, or 22; model: 2000 or 2700
#doAfterIocInit("seq &Keithley2kDMM,('P=xxx:, Dmm=D1, channels=22, model=2700')")
#doAfterIocInit("seq &Keithley2kDMM,('P=xxx:, Dmm=D2, channels=10, model=2000')")
# Oxford Cyberstar X1000 Scintillation detector and pulse processing unit
#dbLoadRecords("$(IP)/ipApp/Db/Oxford_X1k.db","P=xxx:,S=s1,PORT=serial4")
# Oxford ILM202 Cryogen Level Meter (Serial)
#dbLoadRecords("$(IP)/ipApp/Db/Oxford_ILM202.db","P=xxx:,S=s1,PORT=serial5")
# Love Controllers
#devLoveDebug=1
#loveServerDebug=1
#dbLoadRecords("$(IP)/ipApp/Db/love.db", "P=xxx:,Q=Love_0,C=0,PORT=PORT2,ADDR=1")
# END serial.cmd --------------------------------------------------------------