Newer
Older
include $(TOP)/configure/CONFIG
#----------------------------------------
# ADD MACRO DEFINITIONS AFTER THIS LINE
#=============================
# For Kate Feng's implementation of devScaler.c, which uses Till
# Straumann's basicIoOps.h to bridge any mismatch between endianness
# of Joerger scaler hardware and endianness of processor.
#USR_CFLAGS += -DHAS_IOOPS_H
#==================================================
# build a support library that some other application can use
#LIBRARY_IOC += xxxSupport
# xxxRecord.h will be created from xxxRecord.dbd
#DBDINC += xxxRecord
# install support-library .dbd into <top>/dbd
#DBD += xxxSupport.dbd
# The following are compiled and added to the Support library
#xxxSupport_SRCS += xxxRecord.c
#xxxSupport_LIBS += $(EPICS_BASE_IOC_LIBS)
#=============================
# build an ioc application
PROD_IOC = xxx
# Note that the order in which .dbd files are added to a list variable
# doesn't matter, but the order of libraries does.
# <name>.dbd will be created from <name>Include.dbd
DBD += iocxxxWin32.dbd
iocxxxWin32_DBD += xxxCommonInclude.dbd
# If your host supports libpcap and libnet and you want to build Canberra network
# support uncomment the following line
#iocxxxWin32_DBD += mcaCanberraSupport.dbd
# If you want to build parallel port or USB interfaces to Saturn and/or xMAP DXP
# then uncomment the following two lines
iocxxxWin32_DBD += dxpSupport.dbd
xxx_LIBS_WIN32 += dxp handel
ifeq ($(EPICS_HOST_ARCH), cygwin-x86)
DBD += iocxxxCygwin.dbd
iocxxxCygwin_DBD += xxxCommonInclude.dbd
# If you want to build parallel port or USB interfaces to Saturn and/or xMAP DXP
# then uncomment the following two lines
iocxxxCygwin_DBD += dxpSupport.dbd
xxx_LIBS_cygwin32 += dxp handel
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
#iocxxxVX_DBD += iocxxxVXInclude.dbd
iocxxxVX_DBD += xxxCommonInclude.dbd
iocxxxVX_DBD += vmeVXSupport.dbd
iocxxxVX_DBD += stdVXSupport.dbd
iocxxxVX_DBD += ipVXSupport.dbd
iocxxxVX_DBD += mcaSISSupport.dbd
iocxxxVX_DBD += ipUnidigSupport.dbd
iocxxxVX_DBD += dac128VSupport.dbd
iocxxxVX_DBD += ip330Support.dbd
iocxxxVX_DBD += camacSupport.dbd
iocxxxVX_DBD += devCamacSupport.dbd
iocxxxVX_DBD += dxpSupport.dbd
iocxxxVX_DBD += allenBradley.dbd
iocxxxVX_DBD += quadEMSupport.dbd
iocxxxVX_DBD += mcaCanberraSupport.dbd
iocxxxVX_DBD += devLove.dbd
# from ipac
iocxxxVX_DBD += tyGSOctal.dbd
iocxxxVX_DBD += drvIpac.dbd
# from asyn
iocxxxVX_DBD += drvGsIP488.dbd
iocxxxVX_DBD += vxStats.dbd
iocxxxVX_DBD += softGlueSupport.dbd
# from motor
iocxxxVX_DBD += devDeltaTau.dbd
iocxxxVX_DBD += devOms.dbd
# from areaDetector
iocxxxVX_DBD += ADSupport.dbd
iocxxxVX_DBD += simDetectorSupport.dbd
#iocxxxVX_DBD += pluginSupport.dbd
iocxxxVX_DBD += AD_pluginSupportVX.dbd
DBD += iocxxxLinux.dbd
iocxxxLinux_DBD += xxxCommonInclude.dbd
iocxxxLinux_DBD += ADSupport.dbd
xxx_LIBS_Linux += ADBase
# If your host supports libpcap and libnet and you want to build Canberra network
# support, set LINUX_NET_INSTALLED to YES in <synApps>/configure/CONFIG_SITE.
ifeq ($(LINUX_NET_INSTALLED), YES)
iocxxxLinux_DBD += mcaCanberraSupport.dbd
xxx_LIBS_Linux += mcaCanberra
endif
# If your host supports parallel port or USB interfaces to Saturn DXP, set
# LINUX_USB_INSTALLED to YES in <synApps>/configure/CONFIG_SITE.
ifeq ($(LINUX_USB_INSTALLED), YES)
iocxxxLinux_DBD += dxpSupport.dbd
xxx_LIBS_Linux += dxp handel
endif
ifeq ($(OS_CLASS), solaris)
DBD += iocxxx_solaris.dbd
iocxxx_solaris_DBD += xxxCommonInclude.dbd
# <name>_registerRecordDeviceDriver.cpp will be created from <name>.dbd
xxx_SRCS_vxWorks += iocxxxVX_registerRecordDeviceDriver.cpp
rivers
committed
xxx_SRCS_Linux += iocxxxLinux_registerRecordDeviceDriver.cpp xxxMain.cpp
xxx_SRCS_WIN32 += iocxxxWin32_registerRecordDeviceDriver.cpp xxxMain.cpp
rivers
committed
xxx_SRCS_cygwin32 += iocxxxCygwin_registerRecordDeviceDriver.cpp xxxMain.cpp
xxx_SRCS_solaris += iocxxx_solaris_registerRecordDeviceDriver.cppa xxxMain.cpp
mooney
committed
xxx_Common_LIBS += busy
xxx_Common_LIBS += sscan
xxx_Common_LIBS += autosave
xxx_Common_LIBS += optics
xxx_Common_LIBS += std
xxx_Common_LIBS += ip
xxx_Common_LIBS += Acs acsTech80 Aerotech Attocube Faulhaber Ims KohzuMotor Mclennan
xxx_Common_LIBS += Micos MicroMo NewFocus Newport Oriel PI PIJena Parker SmartMotor
xxx_Common_LIBS += ThorLabs softMotor motorSimSupport motor
xxx_Common_LIBS += asyn
xxx_Common_LIBS += seqDev seq pv
xxx_LIBS_vxWorks += allenBradley
xxx_LIBS_vxWorks += mcaSIS
xxx_LIBS_vxWorks += mcaCanberra
xxx_LIBS_vxWorks += ip330
xxx_LIBS_vxWorks += ipUnidig
xxx_LIBS_vxWorks += dac128V
xxx_LIBS_vxWorks += quadEM
xxx_LIBS_vxWorks += camac devCamac
xxx_LIBS_vxWorks += dxp handel
xxx_LIBS_vxWorks += love
xxx_LIBS_vxWorks += vxStats
xxx_LIBS_vxWorks += vme
xxx_LIBS_vxWorks += TyGSOctal Ipac
xxx_LIBS_vxWorks += oms DeltaTau
xxx_LIBS_vxWorks += softGlue
# areaDetector stuff
xxx_LIBS_vxWorks += simDetector
xxx_LIBS_vxWorks += NDPlugin
xxx_LIBS_vxWorks += netCDF
xxx_LIBS_vxWorks += ADBase
#The following adds support from base/src/vxWorks
xxx_OBJS_vxWorks += $(EPICS_BASE_BIN)/vxComLibrary
xxx_LIBS_vxWorks += $(xxx_Common_LIBS)
xxx_LIBS_Linux += $(xxx_Common_LIBS)
xxx_LIBS_solaris += $(xxx_Common_LIBS)
xxx_LIBS_cygwin32 += $(xxx_Common_LIBS)
xxx_LIBS_WIN32 += $(xxx_Common_LIBS)
# If the host has libnet and libpcap for mca/Canberra support
# uncomment the following line.
#xxx_SYS_LIBS_Linux += net pcap
# For USB support on Saturn uncomment the following line
xxx_SYS_LIBS_Linux += usb
# This is needed (and provided) by areaDetector on Linux and WIN32
xxx_SYS_LIBS_cygwin32 += DLPORTIO PlxApi setupapi
xxx_LIBS_WIN32 += DLPORTIO PlxApi
xxx_SYS_LIBS_WIN32 += setupapi
# areaDetector needs these
xxx_SYS_LIBS_solaris += tiff jpeg z
#xxx_SYS_LIBS_solaris += NeXus mfhdf df hdf5 mxml
# To use versions of these libraries supplied with areaDetector use this line
xxx_LIBS_Linux += NeXus mfhdf df hdf5 mxml
# To use system versions of these libraries use this line
#xxx_SYS_LIBS_Linux += NeXus mfhdf df hdf5 mxml
# To use versions of these libraries supplied with areaDetector use this line
xxx_LIBS_Linux += tiff jpeg z
# To use system versions of these libraries use this line
#xxx_SYS_LIBS_Linux += tiff jpeg z
#===========================
include $(TOP)/configure/RULES
#----------------------------------------
# ADD RULES AFTER THIS LINE