load string sequence database

1969cdef · mooney · 11f739f7 · 1969cdef
Commit 1969cdef authored 18 years ago by mooney
--- a/iocBoot/iocCygwin/st.cmd
+++ b/iocBoot/iocCygwin/st.cmd
 # Cygwin startup script
 < envPaths
 # save_restore.cmd needs the full path to the startup directory, which
 # envPaths currently does not provide
 epicsEnvSet(STARTUP,$(TOP)/iocBoot/$(IOC))
 # Increase size of buffer for error logging from default 1256
 errlogInit(20000)
 # Specify largest array CA will transport
 # Note for N sscanRecord data points, need (N+1)*8 bytes, else MEDM
 # plot doesn't display
 epicsEnvSet EPICS_CA_MAX_ARRAY_BYTES 64008
 ################################################################################
 # Tell EPICS all about the record types, device-support modules, drivers,
 # etc. in the software we just loaded (xxx.munch)
 dbLoadDatabase("../../dbd/iocxxxCygwin.dbd")
 iocxxxCygwin_registerRecordDeviceDriver(pdbbase)
 ### save_restore setup
 # We presume a suitable initHook routine was compiled into xxx.munch.
 # See also create_monitor_set(), after iocInit() .
 < save_restore.cmd
 # serial support
-< serial.cmd
+#< serial.cmd
 # Motors
 #dbLoadTemplate("basic_motor.substitutions")
-dbLoadTemplate("motor.substitutions")
+#dbLoadTemplate("motor.substitutions")
 dbLoadTemplate("softMotor.substitutions")
 dbLoadTemplate("pseudoMotor.substitutions")
 ### Allstop, alldone
 # This database must agree with the motors and other positioners you've actually loaded.
 # Several versions (e.g., all_com_32.db) are in stdApp/Db
 dbLoadRecords("$(STD)/stdApp/Db/all_com_16.db","P=xxx:")
 ### Insertion-device control
 #dbLoadRecords("$(STD)/stdApp/Db/IDctrl.db","P=xxx:,xx=02us")
 # sample-wheel
 dbLoadRecords("$(STD)/stdApp/Db/sampleWheel.db", "P=xxx:,ROWMOTOR=xxx:m7,ANGLEMOTOR=xxx:m8")
 ### Scan-support software
 # crate-resident scan.  This executes 1D, 2D, 3D, and 4D scans, and caches
 # 1D data, but it doesn't store anything to disk.  (See 'saveData' below for that.)
 dbLoadRecords("$(SSCAN)/sscanApp/Db/scan.db","P=xxx:,MAXPTS1=8000,MAXPTS2=1000,MAXPTS3=10,MAXPTS4=10,MAXPTSH=8000")
 # A set of scan parameters for each positioner.  This is a convenience
 # for the user.  It can contain an entry for each scannable thing in the
 # crate.
 dbLoadTemplate("scanParms.substitutions")
 ### Slits
 dbLoadRecords("$(OPTICS)/opticsApp/Db/2slit.db","P=xxx:,SLIT=Slit1V,mXp=m3,mXn=m4")
 dbLoadRecords("$(OPTICS)/opticsApp/Db/2slit.db","P=xxx:,SLIT=Slit1H,mXp=m5,mXn=m6")
 # under development...
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/2slit_soft.db","P=xxx:,SLIT=Slit2V,mXp=m13,mXn=m14")
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/2slit_soft.db","P=xxx:,SLIT=Slit2H,mXp=m15,mXn=m16")
 # X-ray Instrumentation Associates Huber Slit Controller
 # supported by a customized version of the SNL program written by Pete Jemian
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/xia_slit.db", "P=xxx:, HSC=hsc1:")
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/xia_slit.db", "P=xxx:, HSC=hsc2:")
 #dbLoadRecords("$(IP)/ipApp/Db/generic_serial.db", "P=xxx:,C=0,SERVER=serial7")
 ### 2-post mirror
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/2postMirror.db","P=xxx:,Q=M1,mDn=m18,mUp=m17,LENGTH=0.3")
 ### User filters
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/filterMotor.db","P=xxx:,Q=fltr1:,MOTOR=m1,LOCK=fltr_1_2:")
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/filterMotor.db","P=xxx:,Q=fltr2:,MOTOR=m2,LOCK=fltr_1_2:")
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/filterLock.db","P=xxx:,Q=fltr2:,LOCK=fltr_1_2:,LOCK_PV=xxx:DAC1_1.VAL")
 ### Optical tables
 #tableRecordDebug=1
 dbLoadRecords("$(OPTICS)/opticsApp/Db/table.db","P=xxx:,Q=Table1,T=table1,M0X=m1,M0Y=m2,M1Y=m3,M2X=m4,M2Y=m5,M2Z=m6,GEOM=SRI")
 ### Monochromator support ###
 # Kohzu and PSL monochromators: Bragg and theta/Y/Z motors
 # standard geometry (geometry 1)
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/kohzuSeq.db","P=xxx:,M_THETA=m9,M_Y=m10,M_Z=m11,yOffLo=17.4999,yOffHi=17.5001")
 # modified geometry (geometry 2)
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/kohzuSeq.db","P=xxx:,M_THETA=m9,M_Y=m10,M_Z=m11,yOffLo=4,yOffHi=36")
 # Spherical grating monochromator
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/SGM.db","P=xxx:,N=1,M_x=m7,M_rIn=m6,M_rOut=m8,M_g=m9")
 # 4-bounce high-resolution monochromator
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/hrSeq.db","P=xxx:,N=1,M_PHI1=m9,M_PHI2=m10")
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/hrSeq.db","P=xxx:,N=2,M_PHI1=m11,M_PHI2=m12")
 ### Orientation matrix, four-circle diffractometer (see seq program 'orient' below)
 #dbLoadRecords("$(OPTICS)/opticsApp/Db/orient.db", "P=xxx:,O=1,PREC=4")
 #dbLoadTemplate("orient_xtals.substitutions")
 # Load single element Canberra AIM MCA and ICB modules
 #< canberra_1.cmd
 # Load 13 element detector software
 #< canberra_13.cmd
 # Load 3 element detector software
 #< canberra_3.cmd
 ### Stuff for user programming ###
 dbLoadRecords("$(CALC)/calcApp/Db/userCalcs10.db","P=xxx:")
 dbLoadRecords("$(CALC)/calcApp/Db/userCalcOuts10.db","P=xxx:")
 dbLoadRecords("$(CALC)/calcApp/Db/userStringCalcs10.db","P=xxx:")
-dbLoadRecords("$(CALC)/calcApp/Db/userTransforms10.db","P=xxx:")
+dbLoadRecords("$(STD)/stdApp/Db/userStringSeqs10.db","P=xxx:")
-# extra userCalcs (must also load userCalcs10.db for the enable switch)
+dbLoadRecords("$(CALC)/calcApp/Db/userArrayCalcs10.db","P=xxx:,N=2000")
-dbLoadRecords("$(CALC)/calcApp/Db/userCalcN.db","P=xxx:,N=I_Detector")
+dbLoadRecords("$(CALC)/calcApp/Db/userTransforms10.db","P=xxx:")
-dbLoadRecords("$(CALC)/calcApp/Db/userAve10.db","P=xxx:")
+# extra userCalcs (must also load userCalcs10.db for the enable switch)
-# string sequence (sseq) record
+dbLoadRecords("$(CALC)/calcApp/Db/userCalcN.db","P=xxx:,N=I_Detector")
-dbLoadRecords("$(STD)/stdApp/Db/yySseq.db","P=xxx:,S=Sseq1")
+dbLoadRecords("$(CALC)/calcApp/Db/userAve10.db","P=xxx:")
-dbLoadRecords("$(STD)/stdApp/Db/yySseq.db","P=xxx:,S=Sseq2")
+# 4-step measurement
-dbLoadRecords("$(STD)/stdApp/Db/yySseq.db","P=xxx:,S=Sseq3")
+dbLoadRecords("$(STD)/stdApp/Db/4step.db", "P=xxx:")
-# 4-step measurement
+# interpolation
-dbLoadRecords("$(STD)/stdApp/Db/4step.db", "P=xxx:")
+dbLoadRecords("$(CALC)/calcApp/Db/interp.db", "P=xxx:,N=2000")
-# interpolation
+# array test
-dbLoadRecords("$(CALC)/calcApp/Db/interp.db", "P=xxx:,N=2000")
+dbLoadRecords("$(CALC)/calcApp/Db/arrayTest.db", "P=xxx:,N=2000")
-# array test
-dbLoadRecords("$(CALC)/calcApp/Db/arrayTest.db", "P=xxx:,N=2000")
+# Slow feedback
+dbLoadTemplate "pid_slow.substitutions"
-# Slow feedback
-dbLoadTemplate "pid_slow.substitutions"
+# Miscellaneous PV's, such as burtResult
+dbLoadRecords("$(STD)/stdApp/Db/misc.db","P=xxx:")
-# Miscellaneous PV's, such as burtResult
+#dbLoadRecords("$(STD)/stdApp/Db/VXstats.db","P=xxx:")
-dbLoadRecords("$(STD)/stdApp/Db/misc.db","P=xxx:")
-#dbLoadRecords("$(STD)/stdApp/Db/VXstats.db","P=xxx:")
+### Queensgate piezo driver
+#dbLoadRecords("$(IP)/ipApp/Db/pzt_3id.db","P=xxx:")
-### Queensgate piezo driver
+#dbLoadRecords("$(IP)/ipApp/Db/pzt.db","P=xxx:")
-#dbLoadRecords("$(IP)/ipApp/Db/pzt_3id.db","P=xxx:")
-#dbLoadRecords("$(IP)/ipApp/Db/pzt.db","P=xxx:")
+### Queensgate Nano2k piezo controller
+#dbLoadRecords("$(STD)/stdApp/Db/Nano2k.db","P=xxx:,S=s1")
-### Queensgate Nano2k piezo controller
-#dbLoadRecords("$(STD)/stdApp/Db/Nano2k.db","P=xxx:,S=s1")
+### Load database records for Femto amplifiers
+#dbLoadRecords("$(STD)/stdApp/Db/femto.db","P=xxx:,H=fem01:,F=seq01:")
-### Load database records for Femto amplifiers
-#dbLoadRecords("$(STD)/stdApp/Db/femto.db","P=xxx:,H=fem01:,F=seq01:")
+### Load database records for PF4 filters
+#dbLoadRecords("$(OPTICS)/opticsApp/Db/pf4dual.db","P=xxx:,H=pf401:,F=seq01:")
-### Load database records for PF4 filters
-#dbLoadRecords("$(OPTICS)/opticsApp/Db/pf4dual.db","P=xxx:,H=pf401:,F=seq01:")
+###############################################################################
+iocInit
-###############################################################################
-iocInit
+### startup State Notation Language programs
+#seq &kohzuCtl, "P=xxx:, M_THETA=m9, M_Y=m10, M_Z=m11, GEOM=1, logfile=kohzuCtl.log"
-### startup State Notation Language programs
+#seq &hrCtl, "P=xxx:, N=1, M_PHI1=m9, M_PHI2=m10, logfile=hrCtl1.log"
-#seq &kohzuCtl, "P=xxx:, M_THETA=m9, M_Y=m10, M_Z=m11, GEOM=1, logfile=kohzuCtl.log"
-#seq &hrCtl, "P=xxx:, N=1, M_PHI1=m9, M_PHI2=m10, logfile=hrCtl1.log"
+# Keithley 2000 series DMM
+# channels: 10, 20, or 22;  model: 2000 or 2700
-# Keithley 2000 series DMM
+#seq &Keithley2kDMM,("P=xxx:, Dmm=D1, channels=22, model=2700")
-# channels: 10, 20, or 22;  model: 2000 or 2700
-seq &Keithley2kDMM,("P=xxx:, Dmm=D1, channels=22, model=2700")
+# X-ray Instrumentation Associates Huber Slit Controller
+# supported by a SNL program written by Pete Jemian and modified (TMM) for use with the
-# X-ray Instrumentation Associates Huber Slit Controller
+# sscan record
-# supported by a SNL program written by Pete Jemian and modified (TMM) for use with the
+#seq  &xia_slit, "name=hsc1, P=xxx:, HSC=hsc1:, S=xxx:seriala[6]"
-# sscan record
-#seq  &xia_slit, "name=hsc1, P=xxx:, HSC=hsc1:, S=xxx:seriala[6]"
+# Orientation-matrix
+#seq &orient, "P=xxx:orient1:,PM=xxx:,mTTH=m9,mTH=m10,mCHI=m11,mPHI=m12"
-# Orientation-matrix
-#seq &orient, "P=xxx:orient1:,PM=xxx:,mTTH=m9,mTH=m10,mCHI=m11,mPHI=m12"
+# Start PF4 filter sequence program
+#seq pf4Dual,"P=xxx:pf401:seq01:,MONO=,A0=,A1=,A2=,A3=,B0=,B1=,B2=,B3="
-# Start PF4 filter sequence program
-#seq pf4Dual,"P=xxx:pf401:seq01:,MONO=,A0=,A1=,A2=,A3=,B0=,B1=,B2=,B3="
+# Start Femto amplifier sequence programs
+#seq femto,"name=femto1,P=xxx:,H=fem01:,F=seq01:,GAIN1=,GAIN2=,GAIN3=,NOISE="
-# Start Femto amplifier sequence programs
-#seq femto,"name=femto1,P=xxx:,H=fem01:,F=seq01:,GAIN1=,GAIN2=,GAIN3=,NOISE="
+### Start up the autosave task and tell it what to do.
+# The task is actually named "save_restore".
-### Start up the autosave task and tell it what to do.
+# Note that you can reload these sets after creating them: e.g., 
-# The task is actually named "save_restore".
+# reload_monitor_set("auto_settings.req",30,"P=xxx:")
-# Note that you can reload these sets after creating them: e.g., 
+#save_restoreDebug=20
-# reload_monitor_set("auto_settings.req",30,"P=xxx:")
+#
-#save_restoreDebug=20
+# save positions every five seconds
-#
+create_monitor_set("auto_positions.req",5,"P=xxx:")
-# save positions every five seconds
+# save other things every thirty seconds
-create_monitor_set("auto_positions.req",5,"P=xxx:")
+create_monitor_set("auto_settings.req",30,"P=xxx:")
-# save other things every thirty seconds
-create_monitor_set("auto_settings.req",30,"P=xxx:")
+### Start the saveData task.
+saveData_Init("saveData.req", "P=xxx:")
-### Start the saveData task.
-saveData_Init("saveData.req", "P=xxx:")
+dbcar(0,1)
-dbcar(0,1)